Chemical Engineering February 2016 - 31

Vortec
Fractional distillation systems for
continuous and batch processes
Pope Scientific
than 1,000 kg/h cover laboratory,
pilot and commercial-production
scales. Various types of designs,
packings, column internals, control
systems and alternate materials,
such as Hastelloy and glass, are available.
Individual key components or
partial systems are also available for
users that choose to build their own
systems. - Pope Scientific, Inc.,
Saukville, Wis.
www.popeinc.com
This company's stainless-steel fractional
distillation systems (photo) are
available for batch or continuous
processes, and are designed for
critical applications, including highpurity
processing, fragrances, foods,
specialty chemicals, pharmaceutical
intermediates, bio-based materials,
solvents and so on. Column diameters
from 1 to 24 in., and flowrates
ranging from less than 1 to greater
Neutralize static in
film and sheet production
This company's Ionizing Air Knives
(photo) neutralize static that can attract
dust and contaminants, and
stop static discharges that can damage
electronic equipment and shock
personnel. With this technology,
a static neutralizing bar generates
positively and negatively charged
ions, which are carried to the target
by a uniform sheet of amplified air.
The air amplifiers use a small amount
of filtered, compressed air to deliver
a powerful, high-velocity sheet of
laminar air over wide areas. This design
produces increased thrust and
velocity, reduced noise and uniformity,
making Ionizing Air Knives suitable
for moving webs, films, sheets,
strips and other assemblies and objects.
Airflow can be adjusted per
specific application requirements.
Ionizing Air Knives are available in 6-,
12-, 18- and 24-in. lengths. A single
¼-in. NPT compressed-air inlet
will feed up to a 12-in. length, and
two inlets will accommodate longer
models. - Vortec, Cincinnati, Ohio
www.vortec.com
Drier Steam Means Higher Profits
Steam drum design is critical to maintain steam dryness
and water quality for optimum performance of your boiler.
If water is allowed to carryover, then damage can occur
and energy is lost. Carryover is your boiler's enemy.
Dyna-Therm's high performance steam drums
have been protecting downstream equipment
including superheater tubes and turbines for
decades.
We offer proven designs for the following:
* High pressure
* Intermediate pressure
* Low pressure
* Retrofitting of existing drum internals
No steam production rates are too high and no carryover
problems are too difficult for us to solve-steam qualities
of 99.995% with .001 PPM/TDS are possible!
281-987-0726
www.dyna-therm.com
SEPARATION AND STEAM DRUM SOLUTIONS SINCE 1961
Circle 7 on p. 62 or go to adlinks.chemengonline.com/61492-07
ChemiCal engineering www.Chemengonline.Com february 2016
31
Let us design the steam drum that best fits your system.
Performance is what we guarantee!
High efficiency steam
drums and separators!
http://www.popeinc.com http://www.vortec.com http://www.dyna-therm.com http://adlinks.chemengonline.com/61492-07 http://www.Chemengonline.Com
Chemical Engineering February 2016

Table of Contents for the Digital Edition of Chemical Engineering February 2016
