Chemical Engineering March 2022 - 18

Focus
Flow Measurement & Control
Fluid Components International
Endress +Hauser
Thermal flowmeter supports
compressed-air systems
FS10i Series compressed-air flowmeters
(photo) helps users improve
productivity by measuring accurately
and quickly detecting system
leaks, which improves overall process
quality while simultaneously
reducing system energy costs.
The compact FS10i flowmeter series
measures the flowrate of compressed
air, air and natural gas.
They are accurate to ±1.5% of
reading; ±0.5% of full scale; with
repeatability of ±0.5% of reading;
and have a response time of 4 s.
They are SIL-2 rated for safety instrumented
system (SIS) critical
processes. Providing precise direct
mass-flow measurement, the FS10i
flowmeters require no additional
pressure or temperature sensors
or other components to infer flow
measurement. Their sealed and
no-moving-parts sensor does not
foul or clog, and requires no routine
maintenance, which ensures years
of trouble-free, continuous operation.
- Fluid Components International,
San Marcos, Calif.
www.fluidcomponents.com
A new line of flowmeter
measures more than just flow
The Proline 10 product
family
Krohne Messtechnik
(photo) provides time and money
savings over the entire product
lifecycle without any limitation on
measurement performance. Every
device is tested on accredited and
traceable calibration rigs per ISO/
IEC 17025. Proline 10 provides a
high level of simplicity, safety and
reliability. Both commissioning and
operation
can be done quickly,
Bükert Fluid Control Systems
18
in the field, as well as in the control
room. A commissioning wizard
enables on-site configuration with
either the auto-rotatable and highcontrast
LCD touch screen, or the
SmartBlue app via Bluetooth. The
latter approach is particularly useful
when devices are installed in
difficult-to-access locations. Proline
10 flowmeters cover a wide range
of basic applications in all kinds of
industries. Proline Promag electromagnetic
flowmeters are ideally
suited for measuring the flows of
conductive liquids, as well as for
volume measurement of water and
corrosive liquids (Promag W/H/D
10), and chemically aggressive fluids
(Promag P 10). Promass K 10
Coriolis flowmeters measure the
mass flow of both liquids and gases
in utilities, with minimal operating
costs to maintain the flowmeter.
Proline 10 provides optimum product
quality and process monitoring
measurements via the simultaneous
measurement of additional process
variables. In addition to mass flow,
Promass K 10 also measures volume
flow, temperature and optionally
density. - Endress+Hauser,
Greenwood, Ind.
www.us.endress.com
This ultrasonic clamp-on
flowmeter has new features
The ultrasonic clamp-on flowmeter
Optisonic 6300 (photo) is now available
with new designed stainlesssteel
sensor rails and an enhanced
signal converter for quick and easy
setup. The ultrasonic clamp-on
flowmeter is suitable for temporary
or permanent-mount installation on
virtually any pipe up to DN4000,
with process temperatures up to
200°C. It allows for flow measurement
of non-conductive liquids in
main and utility applications where
inline measurement is not possible
or desirable. The new stainlesssteel
316L sensor rails are designed
for quick, easy and accurate installations
and can be mounted to
any pipe within minutes. The same
rail type can be used in hazardous
areas, in extended temperature applications,
in harsh conditions like
offshore environments, or as IP68/
NEMA 6P version in submerged applications.
- Krohne Messtechnik
GmbH, Duisburg, Germany
www.krohne.com
SAW flowmeter with explosion
protection approval
This company's FLOWave flowmeters
(photo) are now approved for
use in potentially explosive atmospheres.
Hygienic measurement
without media contacting sensor
CHEMICAL ENGINEERING WWW.CHEMENGONLINE.COM
MARCH 2022
http://www.us.endress.com http://www.fluidcomponents.com http://www.krohne.com http://WWW.CHEMENGONLINE.COM
Chemical Engineering March 2022

Table of Contents for the Digital Edition of Chemical Engineering March 2022
