Chemical Engineering May 2012 - 6

Letters
Don't miss Dec's
latest developments in
powder processing and
containment systems
ChemInnovations Call For Papers
Presentation abstract submission for the 3rd Annual
ChemInnovations 2012 Conference & Exhibition, presented
by Chemical Engineering, is now open. The advisory committee
is looking for solutions-based presentations that
bridge the knowledge gap through training and technologies.
Programming will be separated into a primer level, an
intermediate level and an innovative technologies category.
CPI challenges, primer/entry level:
* PLCs - overview of concepts and models
* Process Controls - PLC vs. DCS
* Cost estimation - inside and outside the U.S.
* Fundamentals not covered thoroughly in curriculum
Visit our booth and find out
how to optimize your process.
Chemical Engineering e UC Messe 86x123 2012
Mu?llerGmbH_Chemical Engineering_e_86x123.qxd:MüllerGmbH_Chemical Eng
www.dec-group.net
Dec at Achema 2012 · Hall 5.1 / B17
Circle 13 on p. 61 or go to adlinks.che.com/40267-13
ACHEMA
Frankfurt/Main
from 18.06.-22.06.2012
Hall 3.1 / Stand A75
Ultra-Clean
The new cGMP-drum
offers process reliability by
validated cleaning procedures
Details of the Ultra-Clean line:
- Sanitary welded edging
- Geometry of beads and bottom
optimized for clean discharge
of product and for drum cleaning
- Body, base and lid in stainless
steel AISI 316
- FDA-approved silicone elastomer
seal ring, USP Class VI
- Choose from a range
of 20 different sizes
- Compliant with FDA and cGMP
guidelines
Müller GmbH - 79618 Rheinfelden (Germany)
Industrieweg 5 - Phone: +49(0)7623/969-0 - Fax: +49(0)7623/969-69
A company of the Müller group
info@mueller-gmbh.com - www.mueller-gmbh.com
Circle 28 on p. 61 or go to adlinks.che.com/40267-28
6 CHEMICAL ENGINEERING WWW.CHE.COM MAY 2012
* Increasing capacity
* Capital cost estimation
* Risk evaluation and management
Related equipment and services:
* Process equipment
* Liquid, gas and air handling equipment, especially
pumps, valves and compressors
* Heat transfer and high energy demand equipment
* Automation and control equipment and software
* Water treatment and reuse strategies, including those
that specifically relate to hydraulic fracturing
* Air pollution control and monitoring equipment
For questions about abstract submissions contact Cassie
Davie, +1-713-343-1891, cassied@tradefairgroup.com.
Postscripts, corrections
February 2012 (pp. 24-29): In the article, Effective Thermal
Design of Cooling Towers, there were mistakes in the
print version of Equations (4) and (6). The correct equations
are as follows:
(4)
(6)
These typos do not affect any of the numbers in the Tables
or the example problem because the correct equations (not
those printed) were used for the calculations. The corrected,
online version of the article can be found at www.che.com.
* Process safety
* Technical and report writing
* Risk management
* Business and economics
* Project management
* Optimization, troubleshooting and debottlenecking
CPI challenges, intermediate/management level:
* Mentoring and knowledge transfer
* Improving reliability
* Designing for safety and security
* Asset management
* Improving efficiency and energy use
* DCS, control system upgrading
* Computerized maintenance management and predictive
maintenance
http://www.dec-group.net http://adlinks.che.com/40267-13 http://www.mueller-gmbh.com http://www.che.com http://adlinks.che.com/40267-28 http://WWW.CHE.COM
Chemical Engineering May 2012

Table of Contents for the Digital Edition of Chemical Engineering May 2012
