Instrumentation & Measurement Magazine 23-2 - 28

equipment, online visualization of the measurement results
provided by a MEMS, and phasor measurements.
In the future we intend to improve these applications, as
follows. The BST system will include automated current measurements and remote data logging and analysis. The given
FP integration solutions will be expanded by adding device
flashing capabilities via the mobile probes and an external industrial programmer. The MEMS application will include a
position estimation algorithm for an indoor environment and
the display of the related trajectory. The phasor measurements
will be performed in real-time and synchronized with UTC.

References
[1]	 D. Macii and M. Hueller, "2016 faculty course development
award: application-oriented I&M teaching based on industrial
electronics and instrumentation at the University of Trento," IEEE
Instrum. Meas. Mag., vol. 21, no.5, pp. 20-26, Oct. 2018.
[2]	 K. R. Fowler and S. A. Dyer, "2015 faculty course development
award: an introductory graduate course in sensors and systems,"
IEEE Instrum. Meas. Mag., vol. 21, no. 5, pp. 27-31, Oct. 2018.
[3]	 J. J. Rodriguez-Andina, L. Gomes, and S. Bogosyan, "Current
trends in industrial electronics education," IEEE Trans. Ind.
Electron., vol. 57, no. 10, pp. 3245-3252, Oct. 2010.
[4]	 T
  est Access Port and Boundary-Scan Architecture, IEEE Standard
1149.1, May 2013.
[5]	 T. Boroz, "Considerations in the design of a boundary scan
runtime library," IEEE Instrum. Meas. Mag., vol. 17, no. 4, pp. 2730, Aug. 2014.
[6]	 L. Y. Ungar, "Boundary scan as a system-level diagnostic tool,"
IEEE Instrum. Meas. Mag., vol. 16, no. 4, pp. 8-15, Aug. 2013.
[7]	 XJDeveloper-Full test development environment," XJTAG.
[Online]. Available: https://www.xjtag.com/products/software/
xjdeveloper/.
[8]	 S. Y. Seah, M. P. L. Ooi, Y. K. Kuang, C. S. See, S. Panchadcharam,
and S. Demidenko, "Combining ATE and flying probe in-circuit
test strategies for load board verification and test," in Proc. IEEE
Instrum. Meas. Technol. Conf. (IMTC), pp. 1380-1385, Jan. 2009.
[9]	 P. Radev and M. Shirvaikar, "Enhancement of flying probe
tester systems with automated optical inspection," in Proc. 38th
Southeastern Symp. Syst. Theory, pp. 367-371, Mar. 2006.
[10]	"Takaya Flying Probe," AlfaTest. [Online]. Available: http://
www.alfatest.ro/equipment-software/test-equipment/takayaflying-probe/.
[11]	X. Yuan, C. Liu, S. Zhang, S. Yu, and S. Liu, "Indoor pedestrian
navigation using mimiaturized low-cost MEMS inertial
measurement units," in Proc. IEEE/ION Position, Location and
Navigation Symp., pp.487-492, Jul. 2014.
[12]	S. Mischie, "A MATLAB graphical to evaluate the CC2650 sensor

Fig. 6. Phasor measurements performed by means of the real-valued TWLS
algorithm in the case of single phase power voltages: (a) Experimental setup;
(b)-(c) A GUI implemented by students in MATLAB environment.

tag," in Proc. 22nd IMEKO TC4 Int. Symp., pp. 391-396, Sep. 2017.
[13]	S. Mischie, "On the development of bluetooth low energy
devices," in Proc. 12th Int. Conf. Communications (COMM), pp.
339-344, Jun. 2018.

are specified. These applications, which deal with important
aspects in modern measurements, are the following: electronic
circuits testing via Boundary Scan technology, an integration between an off-the-shelf LCR meter and a Flying Probe
28	

[14]	J. K. Lee, E. Park, and S. Robinovitch, "Estimation of attitude and
external acceleration using inertial sensor measuremnt during
various dynamic conditions," IEEE Trans. Instrum. Meas., vol. 61,
no. 8, pp. 2262-2273, Aug. 2012.

IEEE Instrumentation & Measurement Magazine	

April 2020

https://www.xjtag.com/products/software/xjdeveloper/ https://www.xjtag.com/products/software/xjdeveloper/ http://www.alfatest.ro/equipment-software/test-equipment/takaya-flying-probe/ http://www.alfatest.ro/equipment-software/test-equipment/takaya-flying-probe/ http://www.alfatest.ro/equipment-software/test-equipment/takaya-flying-probe/

Instrumentation & Measurement Magazine 23-2

Table of Contents for the Digital Edition of Instrumentation & Measurement Magazine 23-2