GEOGRIDS Dimensional Properties [2] Aperture Size mm (in) Tensile Strength/[Elongation] ASTM D 6637 [2] kN/m (lb/ft)/% Strength @ 5% Strain Ultimate Strength/% (Tult) Titan Environmental Containment Ltd. l www.titanenviro.com Spartan Road Grid™ 10 Fiberglass Geogrid Spartan Road Grid™ 11 Fiberglass Geogrid Spartan Road Grid™ 20 Fiberglass Geogrid Spartan Road Grid™ 10C Composite Geogrid Woven Woven FG FG PP Polymeric Polymeric 610 (18.1) 570 (16.9) 12.7 (0.5) 12.7 (0.5) 12.7 (0.5) 12.7 (0.5) NA NA NA NA 100 ( 6854) 100 (6854) 200 (13,708) 100 (6854) NA NA NA NA A/O, PR A/O, PR Woven FG Polymeric 420 (12.5) 25.4 (1.0) 25.4 (1.0) NA NA 100 (6854) 100 (6854) NA NA A/O, PR Woven FG Polymeric 420 (12.5) 12.7 (0.5) 12.7 (0.5) NA NA 100 (6854) 100 (6854) NA NA A/O, PR [1] PET = Polyester, HDPE = High density polyethylene [4] LTDS = PVC = Polyvinyl chloride EP = Elastomeric Polymer PVA = Polyvinyl alcohol FG = Fiberglass PP = Polypropylene [2] MD = Machine direction XD = Cross-machine direction [3] Test per ASTM D 5262, for a minimum of 10,000 hours and extrapolate to a 75-year time period. Tult RFCR x RFID x RFD RFCR = Reduction factor for creep RFID = Reduction factor for installation damage RFD = Reduction factor for durability NOTE: this equation does not include other reduction factors that may apply to design. Reduction factors are site specific and should be reviewed on a per project basis. Contact the manufacturer for recommendations. [5] A/O = Asphalt overlay B = Base reinforcement E = Embankments PR = Pavement reinforcement S = Slopes SI = Subgrade improvement W = Walls NP = Not provided by manufacturer NA = Not applicable, per manufacturer * = Not for sale in U.S. « Geosynthetics recommends you contact the manufacturers before making any specifying/purchasing decisions » 80 Geosynthetics | December 2022 January 2023 Companies were requested to provide minimum average roll values (MARV). All claims are the responsibility of the manufacturer. Product Name Manufacturing Process Polymer Type [1] Coating Type [1] Mass/Unit Area ASTM D 5261 g/m2 (oz/yd2) MD XD MD XD MD XD Creep Limited Strength-MD [3] ASTM D 5262 kN/m (lb/ft) LTDS GRI GG4-MD [4] kN/m (lb/ft) (in sand) Manufacturer's Suggested Applications [5]http://www.titanenviro.com