Geosynthetics December 2023/January 2024 - 50

GEOTEXTILES
M288 Transportation-Related Applications
Filtration/Hydraulic Properties
Physical Properties
Reinforcement Applications
Wide Width Tensile/Elongation
ASTM D 4595 kN/m (lb/in)/%
Strength @ 5%
Strain [5]
Ultimate
Strength %
(Tult) [5]
MD
XD
MD
XD
TechFab India l www.techfabindia.com
0.25 (60)
TFI-3200HT
(W/PET)
R 42 (NW/PP)
TN-15(NW/PET)
TechGeomattress
TGCM-130
((NW+W,+W)/PP)
TechTube
Geotextile Tube
TGT-1500Z (PPMF)
NP
NP
0.25 (60)
0.2/600 (14.67),
CH
10 (2250)
NP
Tensar International Corp. l www.tensar-international.com
GlasPave® 50
237
(7.0)
NA
✧ Tensile strength per ASTM D 5035
Typar Geosynthetics l www.typargeosynthetics.com
0.59 (30)
Typar 3201
NW-PP-t
Typar 3301
NW-PP-t
Typar 3341
NW-PP-t
Typar 3401
NW-PP-t
Typar 3501
NW-PP-t
Typar 3601
NW-PP-t
Typar 3801
NW-PP-t
Typar 3100
NW-PP-t
Terram T900
NW-PP/PE-t
Terram T1300
NW-PP/PE-t
Terram T1800
NW-PP/PE-t
65*
(1.9)
104*
(3.0)
116*
(3.4)
136*
(4.0)
170*
(5.0)
204*
(6.0)
272*
(8.0)
339*
(10.0)
115*
(3.39)
155*
(4.57)
190*
(5.6)
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
0.30 (50)
0.20 (70)
0.21 (70)
0.20 (70)
0.10 (140)
0.09 (170)
0.074 (200)
0.267 (50)
0.192 (70)
0.185 (70)
1.0/7790 (190), FH
0.8/3895 (95), FH
0.7/3485 (85), FH
0.7/2460 (60), FH
0.5/2050 (50), FH
0.10/615 (15), FH
0.10/328 (8), FH
0.123/328 (8) FH
1.50 sec-¹/4500 l/
min/m2
(112 gal/min/ft2)
1.10 sec-¹/3300 l/
min/m2
(82 gal/min/ft2)
1.00 sec-¹/3000 l/
min/m2
(74.8 gal/min/ft2)
1.77
(398)
2.00
(450)
0.280 (63)
0.380 (85)
NP
NP
NP
0.99
(225)
1.375
(310)
1.650
(370)
2.285
(510)
3.136
(697)
1.2 (270)
NA
NA
NA
NA
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
0.212 (70)
0.212 (70)
0.35 (44)
0.02/240 (5.89), CH
1.5/4500 (110), CH
1.5 /4500 (110),CH
NP
15 (3372)
1.51
(340)
0.75(169)
NP
NA
NA
0.214 (48)
0.12(27)
NP
0.534(120)/50
0.300(67)/50
NP
NP
3
NP
NP
NP
SP, ST, F,
D, E
SP, ST, F, D, E
NP
80 (457)
NA
NA
NP
80 (457)
NA
NA
NP
200
(1142)
9.0 (51)
4.5(25)
110
(628)
100.0
(567)
200
(1142)
9.0 (51)
4.5(25)
90 (514)
100.0
(567)
140
(9590)
NA
NA
NP
NP
NP
NA
NA
NP
NP
R
ST, SP, R
ST,SP,R
Slope and Shore
line Protection,
Channel Slopes
Slope and Shore
line Protection,
Dewatering, flood
control, Breakwater,
Dyke formation
50 kN/m
(285 lb/in)/
<5%✧
NA
NA
NA
NA
NA
NA
0.47
(0.10)
> 232 C
(>450 F)
A/O, PR
0.110 (25)
0.156 (35)
0.18 (40)
0.270 (60)
0.270 (60)
0.400 (90)
0.425 (95)
0.556 (125)
0.200 (45)
0.267 (60)/60
0.533
(120)/60
0.533
(120)/60
0.578
(130)/60
0.710
(160)/60
1.067
(240)/60
1.335
(300)/60
2.000
(450)/60
0.500
(113)/50
0.750
(169)/50
0.950
(214)/50
NP
NP
NP
3
2
2
1
1
3
2
1
NP
NP
NP
SP, ST,
D, E
SP, ST,
D, E
SP, ST,
D, E
SP, ST,
D, E
SP, ST,
D, E
SP, ST,
D, E
SP, ST,
D, E
SP, ST,
D, E
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NP
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
SP, D
SP, S/F, F, D
SP, ST, F,
D, E, P
SP, ST, F,
D, E, P
F, D, SP, ST,
E, P
F, D, SP, ST,
E, R, P
E, SP, ST, R, P
E, SP, ST, R, P
SP, ST, F,
D, E, P
E, SP, ST, R, P
E, SP, ST, R, P
[1] NW = Non woven, -P = needlepunched, -h = calendered
W = Woven, -SF = slit film
= Knitted
t
K
[4] SP = Separation
ST = Stabilization
F
= Filtration
A/O = Asphalt overlay
[5] MD = Machine direction
[2] PP = Polypropylene, PET = Polyester, * = average
[3] FH = Test is run by the falling head method
CH = Test is run by the constant head method
S/F
= Silt Fence
D = Drainage
E
= Erosion Control
SSG = Subgrade Stabilization Geosynthetic
XD = Cross-machine direction
= thermally bonded
[6] For a minimum of 10,000 hours, extrapolated to
a 75 year time period
O/C = Other/combination
[7] LTDS =
Tult
RFCR x RFID x RFD
RFCR = Reduction factor for creep
RFID = Reduction factor for installation damage
RFD
= Reduction factor for durability
NOTE: this equation does not include other reduction factors which may apply to
design. Reduction factors are site specific and should be reviewed on a per project
basis. Contact the manufacturer for recommendations.
SP = Separation
ST = Stabilization
F
RC
= Filtration
= Reinforcement Composite
P = Protection
S/F = Silt Fence
D = Drainage
E = Erosion Control
A/O = Asphalt overlay
SSG = Subgrade Stabilization Geosynthetic
NP = Not provided by manufacturer
NA = Not applicable, per manufacturer
Companies were requested to provide minimum average
roll values (MARV). All claims are the responsibility of
the manufacturer.
« Geosynthetics recommends you contact the manufacturers before making any specifying/purchasing decisions »
50
Geosynthetics | December 2023 January 2024
[8] R
= Reinforcement
Product Name (Structure [1]/
Polymer Type [2])
Mass Per Unit Area
ASTM D 5261 g/m2 (oz/yd2)
Percent Open Area
CWO-22125 %
Apparent Opening Size
ASTM D 4751 mm
(U.S. sieve)
Permittivity
ASTM D 4491 sec-1
Flow Rate (FH or CH) [3]
l/min/m2 (gal/min/ft2)
Puncture ASTM D 6241
kN (lb)
Trapezoid Tearing Strength
ASTM D 4533 kN (lb)
Grab Tensile/Elongation
ASTM D 4632 kN (lb)/%
M288 Survivability Class
M288 Applications [4]
Creep Limited Strength-MD
ASTM D 5262 [6] kN/m (lb/ft)
LTDS GRI GT7-MD (in sand) [7]
kN/m (lb/ft)
Other Manufacturer's
Suggested Applications [8]
http://www.techfabindia.com http://www.tensar-international.com http://www.typargeosynthetics.com
Geosynthetics December 2023/January 2024

Table of Contents for the Digital Edition of Geosynthetics December 2023/January 2024
