APR Sept/Oct 2023 - 37

« BIOPHARMACEUTICAL
Aseptic Processing
Aseptic Processing - " Handling sterile materials in a controlled
environment, in which the air supply, facility, materials, equipment
and personnel are regulated to control microbial and particulate
contamination to acceptable levels " .13
aseptic processing:
* Personnel performance (gowning and
aseptic techniques)
* Environmental quality and control
* Validated cleaning and sterilization
of container/closures, equipment,
utensils, and product-contact surfaces
Where Does the
Process Start and
Where Does
it End?
Define aseptic boundaries for the
manufacturing process. Initial aseptic
cell/tissue harvest? Transport to bedside?
Know your process - aseptic processing
begins when you need to maintain sterility
from that point forward and ends when
the container closure system containing
the final product is closed. APS should
be performed for aseptically produced
vectors, biological matrices, or cell culture
media which are not amenable to terminal
sterilization/filtration.
Manual/Open
Aseptic Processing
Detailed step-by-step instructions should
be in
place
for
consistent,
Design your own MODULA.
repeatable
manual operations. All open manipulations,
any direct/indirect (e.g., fluid path) operator,
equipment contact with the product should
be simulated as closely as possible. Include
representative or worst-case operations,
conditions, and interventions to challenge
routine manufacturing operations. Glove/
sleeve change requirements should be
based on operation risk assessments and
a simple " change as necessary " may not be
sufficient. Equipment and material layout
With a wide range of syringes handled, IMA Life MODULA Series ensures a continuous
motion principle to assemble up to 300 syringes per minute. Make your process more
modular through the configurations that can be achieved thanks to the combination
of its three operating units: plunger rod assembly, label application and backstop insertion.
The highest automation level in a compact design.
 4 models available
 From 50 to 300 syringes per minute
 Compact footprint
 Essential design
ima.it/pharma/machine/modula/
Critical elements to successful
during processing should be as defined as possible to avoid crowding
and interference with airflow and minimize clutter. When tissue is used
to obtain cells, a suitable tissue surrogate based on attributes and
availability may be used to facilitate process simulation. Duration of
process simulation may be shorter duration than your process based
on risk assessments to ensure the shortened time will be representative
of the actual duration in terms of interventions and shift changes.
MODULA Series
EYES ON
ASSEMBLY
www.americanpharmaceuticalreview.com |
| 37
»

http://www.ima.it/pharma/machine/modula/ http://www.americanpharmaceuticalreview.com

APR Sept/Oct 2023

Table of Contents for the Digital Edition of APR Sept/Oct 2023

INSIDER INSIGHT - From Guidelines to Standards: Why Comprehensive AI Regulation is Essential to Spurring Innovation
BIOPHARMACEUTICAL - Aseptic Process Simulation: Cell and Gene Therapy Manufacture
FORMULATION & DEVELOPMENT - Challenges of Analytical Validation for ATMPs
QC Corner - The Intricacies of Testing for Mycoplasmas in Cell Culture Systems
MICROBIOLOGY - Standardized, Scalable And Efficient: Producing Recombinant Factor C to Quality Standards
FORMULATION AND DEVELOPMENT - R Code to Estimate Probability of Passing USP Dissolution Test
FORMULATION AND DEVELOPMENT - Cloud Computing for Drug Discovery: The Time is Now
CGT CIRCUIT - Navigating the Complex Testing Strategies for Viral Vector-based Gene Therapies
MANUFACTURING - Simplifying Finished Product Manufacturer Site Transfer Variations
FORMULATION AND DEVELOPMENT - Advancing Regulatory Compliance with Natural Language Processing
DRUG DELIVERY - Finding a Greater Vantage Point for Creating Green Therapies
WHITEPAPER - Microbial Testing for the Pharmaceutical Industry
Facility Tour - Eurofins BioPharma Product Testing
ROUNDTABLE - Drug Delivery
MANUFACTURING - Accelerating Biologics R&D with Unified Software and Data Flows
An Interview with Jason Downing, Senior Product Manager, TriLink BioTechnologies®
FORMULATION AND DEVELOPMENT - The Role of Data in the Pharmaceutical Lifecycle
BIOPHARMACEUTICAL - Uniting Quality Expectations on Reinvigorated Biopharma Campuses
WHITEPAPER - VITAMIN C – Tableting with LUBRITAB® RBW Lubricant
WHITEPAPER - Leveraging Analytical Technology Process for CMC
BIOPHARMACEUTICAL - Maximizing the Commercialization Potential of Cell and Gene Therapies
MICROBIOLOGY - Comments on Aseptic Process Simulation (APS) in the New EU GMP Annex 1
VENDOR VIEWPOINT - Continuous & Intervention-Free Microbial Monitoring
APR Sept/Oct 2023 - Cover1
APR Sept/Oct 2023 - Cover2
APR Sept/Oct 2023 - 1
APR Sept/Oct 2023 - 2
APR Sept/Oct 2023 - 3
APR Sept/Oct 2023 - 4
APR Sept/Oct 2023 - 5
APR Sept/Oct 2023 - 6
APR Sept/Oct 2023 - 7
APR Sept/Oct 2023 - 8
APR Sept/Oct 2023 - 9
APR Sept/Oct 2023 - 10
APR Sept/Oct 2023 - 11
APR Sept/Oct 2023 - 12
APR Sept/Oct 2023 - 13
APR Sept/Oct 2023 - 14
APR Sept/Oct 2023 - 15
APR Sept/Oct 2023 - 16
APR Sept/Oct 2023 - 17
APR Sept/Oct 2023 - 18
APR Sept/Oct 2023 - 19
APR Sept/Oct 2023 - 20
APR Sept/Oct 2023 - 21
APR Sept/Oct 2023 - 22
APR Sept/Oct 2023 - 23
APR Sept/Oct 2023 - 24
APR Sept/Oct 2023 - 25
APR Sept/Oct 2023 - 26
APR Sept/Oct 2023 - 27
APR Sept/Oct 2023 - 28
APR Sept/Oct 2023 - 29
APR Sept/Oct 2023 - 30
APR Sept/Oct 2023 - INSIDER INSIGHT - From Guidelines to Standards: Why Comprehensive AI Regulation is Essential to Spurring Innovation
APR Sept/Oct 2023 - 32
APR Sept/Oct 2023 - 33
APR Sept/Oct 2023 - BIOPHARMACEUTICAL - Aseptic Process Simulation: Cell and Gene Therapy Manufacture
APR Sept/Oct 2023 - 35
APR Sept/Oct 2023 - 36
APR Sept/Oct 2023 - 37
APR Sept/Oct 2023 - 38
APR Sept/Oct 2023 - 39
APR Sept/Oct 2023 - 40
APR Sept/Oct 2023 - 41
APR Sept/Oct 2023 - 42
APR Sept/Oct 2023 - 43
APR Sept/Oct 2023 - FORMULATION & DEVELOPMENT - Challenges of Analytical Validation for ATMPs
APR Sept/Oct 2023 - 45
APR Sept/Oct 2023 - 46
APR Sept/Oct 2023 - 47
APR Sept/Oct 2023 - 48
APR Sept/Oct 2023 - 49
APR Sept/Oct 2023 - QC Corner - The Intricacies of Testing for Mycoplasmas in Cell Culture Systems
APR Sept/Oct 2023 - 51
APR Sept/Oct 2023 - MICROBIOLOGY - Standardized, Scalable And Efficient: Producing Recombinant Factor C to Quality Standards
APR Sept/Oct 2023 - 53
APR Sept/Oct 2023 - 54
APR Sept/Oct 2023 - 55
APR Sept/Oct 2023 - FORMULATION AND DEVELOPMENT - R Code to Estimate Probability of Passing USP Dissolution Test
APR Sept/Oct 2023 - 57
APR Sept/Oct 2023 - 58
APR Sept/Oct 2023 - 59
APR Sept/Oct 2023 - 60
APR Sept/Oct 2023 - 61
APR Sept/Oct 2023 - FORMULATION AND DEVELOPMENT - Cloud Computing for Drug Discovery: The Time is Now
APR Sept/Oct 2023 - 63
APR Sept/Oct 2023 - 64
APR Sept/Oct 2023 - 65
APR Sept/Oct 2023 - 66
APR Sept/Oct 2023 - 67
APR Sept/Oct 2023 - CGT CIRCUIT - Navigating the Complex Testing Strategies for Viral Vector-based Gene Therapies
APR Sept/Oct 2023 - 69
APR Sept/Oct 2023 - MANUFACTURING - Simplifying Finished Product Manufacturer Site Transfer Variations
APR Sept/Oct 2023 - 71
APR Sept/Oct 2023 - 72
APR Sept/Oct 2023 - 73
APR Sept/Oct 2023 - FORMULATION AND DEVELOPMENT - Advancing Regulatory Compliance with Natural Language Processing
APR Sept/Oct 2023 - 75
APR Sept/Oct 2023 - 76
APR Sept/Oct 2023 - 77
APR Sept/Oct 2023 - DRUG DELIVERY - Finding a Greater Vantage Point for Creating Green Therapies
APR Sept/Oct 2023 - 79
APR Sept/Oct 2023 - 80
APR Sept/Oct 2023 - 81
APR Sept/Oct 2023 - WHITEPAPER - Microbial Testing for the Pharmaceutical Industry
APR Sept/Oct 2023 - 83
APR Sept/Oct 2023 - 84
APR Sept/Oct 2023 - 85
APR Sept/Oct 2023 - Facility Tour - Eurofins BioPharma Product Testing
APR Sept/Oct 2023 - 87
APR Sept/Oct 2023 - 88
APR Sept/Oct 2023 - ROUNDTABLE - Drug Delivery
APR Sept/Oct 2023 - 90
APR Sept/Oct 2023 - 91
APR Sept/Oct 2023 - MANUFACTURING - Accelerating Biologics R&D with Unified Software and Data Flows
APR Sept/Oct 2023 - 93
APR Sept/Oct 2023 - An Interview with Jason Downing, Senior Product Manager, TriLink BioTechnologies®
APR Sept/Oct 2023 - 95
APR Sept/Oct 2023 - FORMULATION AND DEVELOPMENT - The Role of Data in the Pharmaceutical Lifecycle
APR Sept/Oct 2023 - 97
APR Sept/Oct 2023 - 98
APR Sept/Oct 2023 - BIOPHARMACEUTICAL - Uniting Quality Expectations on Reinvigorated Biopharma Campuses
APR Sept/Oct 2023 - 100
APR Sept/Oct 2023 - 101
APR Sept/Oct 2023 - WHITEPAPER - VITAMIN C – Tableting with LUBRITAB® RBW Lubricant
APR Sept/Oct 2023 - 103
APR Sept/Oct 2023 - WHITEPAPER - Leveraging Analytical Technology Process for CMC
APR Sept/Oct 2023 - 105
APR Sept/Oct 2023 - 106
APR Sept/Oct 2023 - BIOPHARMACEUTICAL - Maximizing the Commercialization Potential of Cell and Gene Therapies
APR Sept/Oct 2023 - 108
APR Sept/Oct 2023 - 109
APR Sept/Oct 2023 - MICROBIOLOGY - Comments on Aseptic Process Simulation (APS) in the New EU GMP Annex 1
APR Sept/Oct 2023 - 111
APR Sept/Oct 2023 - 112
APR Sept/Oct 2023 - 113
APR Sept/Oct 2023 - VENDOR VIEWPOINT - Continuous & Intervention-Free Microbial Monitoring
APR Sept/Oct 2023 - 115
APR Sept/Oct 2023 - 116
APR Sept/Oct 2023 - 117
APR Sept/Oct 2023 - 118
APR Sept/Oct 2023 - 119
APR Sept/Oct 2023 - 120
APR Sept/Oct 2023 - Cover3
APR Sept/Oct 2023 - Cover4
https://www.nxtbookmedia.com