Eclipse Laboratory Grade Steel Furniture - 34

LD-4 Adaptable Laboratory Tables

* Standard Single drawers include lock cylinder
* Standard cabinets have optional locking mechanism available for
most suspended cabinets
* Standard cabinets will require you to specify whether locks are to be
keyed alike or differently

LD-4 Standard Overhead Storage Cabinets
██

██

Many configurations of laboratory grade wall mounted
cabinets can be mounted between the uprights of the LD-4
tables. The following specifications are for standard (non-wall
mounted cabinet derivatives) LD-4 cabinets, for overhead
secured laboratory wall cabinetry please contact your Eclipse
Laboratory Specialist.
Standard LD-4 (non-wall mounted cabinet derivatives)
Overhead Cabinets

LD-4 Corner Table Top & Shelf Assemblies
██

Corner tops & shelves available in radius and square back
treatments.

██

Available in standard laminate, Trespa and Epoxy Resin.

██

Corner tops supported by 12 GA support brackets that are
adjustable the same as the table tops.

██

Corner shelves supported by 12 GA shelf brackets that attach
to the uprights and are adjustable up and down.

* Can be positioned anywhere between the uprights
██

Depths: 12˝, 15˝, 18˝

██

Lengths: 48˝, 60˝, 72˝

██

Radius corner tops have a 150lbs weight capacity, evenly
distributed.

██

14 gauge brackets

██

Shelf can be mounted in front or back nutway for further
positioning options.

██
██

SES-L - Standard Electrical System LAB
Best suited for stand-alone applications.
* Also suited for in-line applications with a separate power source for
each station

██

Integrates power into the workstation.

██

Supplies additional outlets located in the uprights.

██

Single 15 Amp, 120VAC circuit

██

Each workstation will have 6 outlets located on the inside trim
panel of each upright.
* Same for single sided and double sided applications
* Available on 60˝, 72˝, and 84˝ uprights

██

Electrical is pigtailed allowing power to be pulled from the top
of the upright or from the bottom of the upright or underneath
the upright.
When using in-line bench configurations:
* Adder upright has outlets on both sides
* Each side of adder upright is NOT connected to the other side

██

Duplex configured outlets are not flush with the trim panel.

██

Duplexes may affect location of accessories.

██

Accent/Trim panel is metal.

PDS-II Electrical
██

PDS-II - Power Distribution System II

██

Best suited for in-line applications.

██

UL Listed as part of workstation (UL 962 / File # E113928).

██

Integrates 4 independent 20 Amp circuits into the workstation.
* Totaling 80 Amps of power per PDS Power-up connection

██

Four 15-amp (20-amp optional) duplexes above the table top.
* Two on each side of 60˝, 72˝, and 84˝ uprights
* One on each side of 48˝ uprights
* Not available on 36˝ uprights

Radius corner shelves have a 75 lbs weight capacity, evenly
distributed.

██

Square corner tops and shelves include an adjustable rear tube
supports.

██

Square corner tops have a 350 lbs weigh capacity, evenly
distributed.

██

You can suspend cabinetry with special size corner and
support frame - please contact your Eclipse Laboratory
Specialist for additional information.

Heavy gauge formed steel shelf with lip
* 75# Standard capacity
* Shelves include a front and rear lip 1.4˝ high

██

Provides storage area off the table top.

Standard Electrical System - LAB (SES-LAB) Electrical

* Standard overhead cabinets Lengths: 48˝, 60˝, and 72˝
* Standard overhead cabinets have Single Door, Double Door, and
Sliding Door configurations available
* Standard overhead cabinets are all metal construction using 20, 16
& 14 gauge formed steel
* Ideal for storage above the table top
* Overhead storage door includes lock(s)
* Locks can be keyed to match suspended drawers and cabinets excluding cabinets with sliding doors
* Standard cabinet sliding door model does includes "Jewelry Case"
lock
* Standard cabinet outside Dimensions: 16˝H x 14˝D x 48˝, 60˝, or 72˝L
* Standard cabinets inside usable space is 12.5˝H x 13.5˝D
* Standard cabinets door slides up and out of the way (side to side on
sliding door models)
* Standard cabinets include two recessed handles on door for easy
use
* Standard cabinets can be positioned anywhere along the uprights
99 Remember to review where your electrical outlets are placed
* Can be painted all standard colors

██

LD-4 Shelving
██

Uprights are interconnected below table top with molded
interconnect cord.
Each duplex receptacle numbered "1", "2", "3", & "4".
* Numbered receptacle only accesses that numbered circuit

██

Duplex configured outlets are flush with the trim panel.

labs.iacindustries.com

http://labs.iacindustries.com

Eclipse Laboratory Grade Steel Furniture

Table of Contents for the Digital Edition of Eclipse Laboratory Grade Steel Furniture