Quick Ship Work Center Solutions - 17

Quick Value 4-Leg
Options
Quick Value Electrical Channel
* 48 inches in length with eight 15 amp (8) Power outlets and a 6 foot cord
* Constructed of eight (8) gauge Aluminum
* Meets UL 1363 standards and are CSA approved

DIMENSIONS

SHIP. WT.

PART NUMBER

Electrical Channel 48˝L
15 AMP

15 lbs.

QV-1004917

6˝H X 15˝W X 18˝D
Single Drawer

30 lbs.

QV-1050002-DT

12˝H X 15˝W X 18˝D
Single Drawer

35 lbs.

QV-1050004-DT

Shelf - 30˝D x 60˝L

36 lbs.

QV-1021551-DT

Shelf - 30˝D x 72˝L

42 lbs.

QV-1021552-DT

Shelf - 36˝D x 72˝L

44 lbs.

QV-1021554-DT

Divider - 13˝H x 18˝D

4 lbs.

QV-08402-1318-DT

30˝D x 60˝L

5 lbs.

QV - 1021532-DT

30˝D x 72˝L

6 lbs.

QV - 1021533-DT

36˝D x 72˝L

6 lbs.

QV - 1021538-DT

30˝D x 60˝L

20 lbs.

QV-1021541-DT

30˝D x 72˝L

25 lbs.

QV-1021542-DT

36˝D x 72˝L

27 lbs.

QV-1021544-DT

Adjusts bench 30˝H-36˝H

15 lbs.

QV-1004099-DT

Leg Extender 3˝ Caster Kit

30 lbs.

QV-1004089-DT

Quick Value Drawers
* Constructed of a heavy-gauge steel and are equipped with full extension
* 100-lb. capacity metal ball bearing drawer slides
* Safety recessed handles with locks
* Multiple drawers can be keyed alike upon request
* Mounting brackets and necessary hardware are included
* Drawers may be mounted left or right and stacked for multiple drawer

combinations
Quick Value Lower Shelf

Lower Shelf:
* Mounts to bench legs
* 22-inches deep; spans length of bench
* Pre-drilled for up to six (6) shelf dividers
* Finished in powder coat paint

Lower Shelf Divider:
* 13-inches tall; 18-inches deep
* Finished with powder coat paint
* Order up to 6 dividers per shelf

Quick Value Footrest
* Brackets are painted to selected choice and the footrest has a silver finish
* Non-Skid tape along the top side of the footrest for foot security
* Footrest has a Heavy Duty Tubular Design and adjusts front to rear
* Hardware for easy installation is included

Quick Value Lower Paper Roll Holder
* Overall weight capacity is approximately 50 lbs. when evenly distributed
* Roll holder accommodates a roll diameter of 13 inches; 27 inches with

addition of Leg Extenders or Casters - depending on the worksurface
height setting
* This accessory item is not compatible with the addition of a lower shelf
Quick Value Leg Extender Kit
* Provide height adjustability
* Adjustable from 30 inches to 36 inches in 2-inch increments
* 4 leg extenders per kit

Quick Value Leg Extender Caster Kit
* Provides mobility and height adjustability
* 4 leg extenders per kit
* 4 swivel brake casters

Call to Order: 714.990.8997 * Or build your own online: www.IACindustries.com/Configurator

https://www.iacindustries.com/configurator/

Quick Ship Work Center Solutions

Table of Contents for the Digital Edition of Quick Ship Work Center Solutions