Aztec Factory Automation Handbook - N7

1.866.843.0033

WIRING TERMINATION

Standard DIN rail is made of cold rolled steel, electrolytically plated with minimum coating thickness of
1μ (RoHS compliant). Mounting holes, for steel slotted models, are punched after cold rolling, in order to
guarantee the dimensional tolerance and consistency in hole size and spacing. The standard supply length
is 2m (approx. 78 3/4"), and some are also available in 1m (approx. 39 3/8") lengths. All rails can be cut to
length, with or without holes or slots at either end of the rail, in accordance to the Customer's drawing.

DIN Standard 35mm (symmetric) Mounting Rail
* Construction as per Std. DIN 46277/3 and EN 50022
* Dimension: 35x7.5mm.
* Thickness: 1.0mm. [except TS35AL/F4 - thickness 1.5mm]

PART NO

MODEL

DESCRIPTION

LENGTH (M)

WEIGHT PER
M (KG)

STANDARD
PACK (M)

WEIGHT PER
PACK (KG)

FIGURE

PRICE PER
METER

111.013

TS35/F6

Symmetric steel rail, punched
6.3x18mm pitch 25mm, zinc plated
(RoHS compliant)

0.315

40m

12.60

$4.00

"HANDY-CUT" PORTABLE, LIGHT-DUTY
DIN RAIL CUTTERS

MINIMUM PURCHASE QUANTITY: 2 METERS

A tool designed and priced for the small panel builder and contractor.
Type 30 002/35 (Part No. 510.801) "Handy-Cut" is a compact, fully
portable tool (it weighs only 2.5 kg ~ 6 lbs.) which cleanly cuts 35x7.3mm
(DIN 46277-3) steel DIN rail, pre-punched or not. Type 30 002/15 (Part
No. 500.811) cuts "miniature" 15x5mm steel DIN rail (DIN 46277-2).
There is no need to mount this tool on a bench, as it is equipped with two
handles. Cutting requires minimal effort.
PART NO

DESCRIPTION

PRICE

510.801

"Handy-Cut" Portable, DIN Rail cutters

$771.43

SHIPPING
CHARGES
MAY VARY

DIN RAIL BRACKETS

Support Brackets and Accessories
Steel brackets are used to stand-off DIN rail or components within an electrical panel.
* Made of steel, zinc plated and passivated (RoHS compatible)
* Extremely resistant to corrosion
* Threaded holes are metric M5 or M6 as indicated
* Mounting holes are 7x12mm for easy application
* Support Brackets & Accessories (Order by Part No.)
PART NO.

DESCRIPTION

PRICE

100.107

Angle bracket, approx. 45 degrees, height 58mm thread M6, 20 mm x 58 mm

$430.22

100.108

Angle bracket, approx. 45 degrees, height 68mm thread M6, 20 mm x 68 mm

$447.78

100.201

Straight bracket 20 mm. high thread M6

$328.57

100.251

Straight bracket 25 mm high thread M6

$328.57

100.299

Hex spacer 100 mm. high thread M6

$316.08

100.301

Straight bracket 30 mm. high thread M6

$328.57

100.441

Straight bracket 40 mm. high thread M6

$361.74

100.501

Straight bracket 50 mm. high thread M6

$410.91

100.706

Straight bracket 70 mm. high thread M6

$439.00

100.904

Straight bracket 90 mm. high thread M6

$482.92

ACCESSORIES - for Standoff Insulators and Support Brackets
PART NO.

DESCRIPTION

USE WITH

PRICE

100.006

M6 screw, flat head l= 12mm

All M6 brackets

$44.14

100.008

M6 nut, steel

M6 Screws

$18.57

WEBLINK

N107
For Final Product Selection & Options Visit aztecsupply.com

aztec su pply.com

PANEL HARDWARE & ACCESSORIES

DIN Rail

Aztec Factory Automation Handbook

Table of Contents for the Digital Edition of Aztec Factory Automation Handbook