Entrance Hardware OPTIONAL - MID RAIL PANIC DEVICE CONCEALED VERTICAL ROD Description: 1. 2. Concealed vertical rod with top and bottom (two point) vertical locking rods concealed in door stiles. Depressing the operating panel at any point retracts the bottom rod from threshold and releases the top latch from the transom bar/header mounted strike. 3. Upon closing, top latch re-engages strike securely and frees the bottom bolt to engage the threshold. Door is then locked from the exterior. 4. 5. 6. Panic device can be de-activated or " dogged " with allen key at the locking stile at the end of the operating panel. Housing is a single aluminum extrusion 8-3/4 "" (222.3mm) in height including glass stops for 1/4 " glass, Rim cylinder diameter is 1-5/32 " (29.4mm). Housing is pinned and welded into place for added strength. Projection of operating panel is approximately 1 " (25.4mm) in locked position and 1/2 " (12.7mm) when " dogged. " 7. Panic mechanism is concealed in door cross rail extrusion. Finish: Operating panel is clear or black anodized aluminum. Cross rail is finished to match door. P-55215 Mid Rail Panic Device For use with: Model 20D/35D/50D, 40M/50M, and 35H/50H. STANDARD - PANIC PULL Description: Innovatively styled extruded aluminum 1 " diameter canted offset pull with 9 " O.C. mounting. The open style assists handicapped access and permits easy access to the lock cylinder. Finish: Clear or black anodized finish. H-1541 Panic Pull Effective Date: April 16, 2024 | 01-1008-09 Page-17