Entrance Hardware OFFSET PIVOT - FRAME PORTION FOR NO THRESHOLD APPLICATIONS Description: 1. Cast stainless steel pivot base securely anchors pivot at three points directly to the floor. 2. Designed to work with the standard offset pivot door portion. H-2111 Offset Pivot for No Threshold Applications E1-0387 Pivot Shim Finish: Mill finish. For use with: Models 20D/35D/50D, 25T/35T/50T, 35XT/50XT, 35H, and 25FD. PIVOT SHIM Description: 1. Solid machined aluminum shim for use with H-2111. Finish: Mill finish. For use with: Models 35XT/50XT. Optional for all other YKK AP entrances. STANDARD - CENTER PIVOT Description: 1. Cast aluminum " Walking Beam Type " frame pivot portion with hardened steel pivot pin for additional extension through transom bar/header. 2. Door pivot portions are machined aluminum with oilite bronze self-lubricating bearings; top center hung pivot parts are concealed. H-2401 Top Center Pivot Finish: Frame portion is natural cast aluminum; machined door portion is mill finish. Application: 1. Use in conjunction with center hung doors with floor closers. 2. Use top and bottom center pivots with surface mounted closer or top pivot only with floor closer. For use with: Models 20D/35D/50D and 40M/50M. STANDARD - BOTTOM CENTER PIVOT Description: 1. Frame portion (with or without threshold): Extruded machined aluminum with adjustable pin. 2. Threshold portion: Ball bearing, adjustable pivot pin. 3. Without threshold: Stainless steel pivot pin; not adjustable in the pivot housing. 4. Door portion: Steel clamping bolt threaded into cast aluminum pivot block. Finish: Mill finish. H-2501 Bottom Center Pivot Application: 1. Entrances with thresholds: Pivot is anchored to frame and threshold. This frame portion has an adjustable pin for proper door and frame clearance. 2. Entrances without thresholds: Frame portion is securely fastened to frame and directly to floor. 3. Use top and bottom center pivots with surface mounted closer or bottom pivot only with concealed overhead closer. For use with: Models 20D/35D/50D and 40M/50M. Page-8 01-1008-09 | Effective Date: April 16, 2024