dryer itself, and the option of a split belt. " Belt width and infeed length is especially Note the generous infeed belt length on this Anatol unit. important if you're feeding multiple presses into a single dryer, " Sroka says. " You'll work more effi ciently if you can lay two garments side by side on the belt. A split belt dryer will allow you to run the belts at diff erent speeds. If you have two presses printing two diff erent ink types, " he adds, " you can cure them both properly and simultaneously with a single dryer. A split belt dryer will also allow you to run the belts in diff erent directions, so it's a good fi t if your shop layout dictates that you have presses on either end of the dryer. " Whatever the case, as with fl ash units, dryer units are an area in which you don't want to cut costs. Reliable consistent heat and a rock-solid precision conveyor are vital to ensuring the designs you put all that time and eff ort into creating and printing perform well out in in the real world on the garments to which they've been applied. ...as with fl ash units, This Workhorse Powerhouse Series II electric dryer boasts touchscreen control. dryer units are an area in which you don't want to cut costs theygsgroup.com transferexpress.comhttp://theygsgroup.com http://TransferExpress.com http://www.theygsgroup.com http://www.transferexpress.com