Evaluation Engineering - 28

1
2

3
4

1. Convection cooled
600W programmable
power supplies
TDK-Lambda GXE600
programmable AC-DC power
supply convection-cooled
600W rated series is certified
to the medical IEC 60601-1 and
industrial IEC 60950-1 and IEC
62368-1 standards. It is suitable
for applications requiring widerange output voltage and current
programming, with sensitivity
to noise from cooling fans. The
GXE600 is available with a
nominal 24V or 48V output and
can be programmed using the
RS-485 interface (Modbus RTU
protocol) or an external 0-6V
analog signal for constant voltage
and constant current operation.
The programming range is 20% to
120% for the voltage and 20% to
100% for the current.

TDK-Lambda

28

EVALUATION ENGINEERING JUNE 2019

2. Broadband amplifier
Model SBB-0524034318-KFKF-E8
is a broadband amplifier with a
typical small signal gain of 43 dB,
a nominal P1dB of +18 dBm, and a
typical noise figure of 5 dB across
the frequency range of 0.5 to 40
GHz. The DC power requirement
for the amplifier is +12 VDC/650
mA. The use of a heat sink is
advised to assist in cooling the
device. The RF connectors are
female K connectors. Other port
configurations, such as male K
connectors for either input or
output port, are also available
under different model numbers.

Sage Millimeter

3. Image-based
laser sensor

4. 3.75 in. stroke linear
voice coil motor

Keyence Corporation of America
has released the IX Series, a new
image-based laser sensor. By
combining a camera with a laser,
users can now determine part
position prior to performing laser
inspection, reducing hardware
and installation costs. The IX
Series will retain the quick-setup
simplicity for which Keyence
products have become known.
The IX Series is designed to
tackle four types of inspection
situations: Unrepeatable target
locations, reference height
checks, low-contrast targets,
and inspections of multiple areas
at once. Because the IX Series
is laser-based, low-contrast
inspections such as height of
a black component on a black
background are easily determined.

The LVCM-051-127-01 Linear Voice
Coil Motor by Moticont has a stroke
length of 3.75 in. (95.3 mm). This
2.00 in. (50.8 mm) diameter linear
motor has a high force-to-size ratio
of 5 lb (22.2 N) and a peak force
of 15.8 lbs. (70.3 N) at 10% duty
cycle. The motor features two
10-32 UNC-2B threaded mounting
holes in the housing and two 10-32
UNC-2B threaded mounting holes
in the coil end for easy integration
into new and existing applications.
A complete plug-and-play system
including an encoder and servo
controller is also available.

Keyence Corporation

Moticont
http://www.rsleads.com/906ee-177 http://www.rsleads.com/906ee-181 http://www.rsleads.com/906ee-178 http://www.rsleads.com/906ee-183
Evaluation Engineering

Table of Contents for the Digital Edition of Evaluation Engineering
