Evaluation Engineering - 31

5. Digital Differential
Measuring Systems

6. Small Power-Saving
3D Magnetic Sensor

7. DPM Leverages
Multicolor LED Tech

The KD-5600 family of eddy
current measurement systems
is suitable for use in COTS
applications for fast steering
mirrors, magnetic bearing active
control, shaft vibration, image
stabilization, and adaptive optics.
Customers in the small satellite,
semi-conductors, military/
aerospace, high precision metal
working and UAV/drone sectors
can benefit from the KD-5600
system's host of features.
Designed for noncontact linear
position displacement sensing
applications, Kaman released three
configurations for tailored use. The
KD-5656 (digital system), KD-5640
(analog system) and KD-5690 (FE
system) are equipped with custom
sensors, signal processing, analog
to digital converter and a custom
calibration system.

Infineon Technologies has
expanded its XENSIV 3D magnetic
sensor family TLx493D with the
TLI493D-W2BW, which uses the
latest 3D Hall generation, and
is housed in a WLB-5 package
measuring 1.13 mm x 0.93 mm x
0.59 mm wafer-level package.
It has an 87 percent smaller
footprint and 46 percent lower
height than legacy products.
With a current consumption of
7 nA in power-down mode, the
magnetic sensor is also suitable
for use in applications than
previously used resistor-based
or optical solutions. The low
height of the TLI493D-W2BW is
helpful in extremely space-critical
applications.

OTEK's New Technology Series
(NTM) of efficient multicolor
LED-based displays leverage ASIC
nanotechnology to provide ±0.5%
accuracy across all 22 models.
Features common to all models
of the NTM series include Auto
Tri-Color bar and digital display,
input-signal failure detection
and alarm, isolated serial I/O,
remote display for SCADA/DCS,
self-diagnostics, math functions
(Polynomials and X-Y tables), as
well as customizable options. First
in the series is the NTM-0 model,
a 3.8" x1.9" horizontal digital
panel meter that replaces any
1/8th-DIN analog or digital meter.

Kaman Precision Products

Infineon

OTEK

8. Anritsu Launches
Portable 400G
Network Tester
Anritsu released its Network
Master Pro MT1040A for 400G
networks, a battery-powered
tester with directly-mounted
QFSP-DD optical modules. The
tester also has a simultaneously
installable 10M-to-100G interface
for access, metro, mobile
fronthaul/backhaul, and datacenter transmission quality tests,
such as BER, throughput, frame
loss, and latency measurements.
Features include a GUI, a remotecontrol-over-network option,
and auto-test functions. Anritsu
claims that the MT1040A is the
smallest B5-size 400G Ethernet
tester available, and offers added
functions for efficient testing,
installation, and maintenance
of faster networks up to 400G
speeds.

Anritsu
SEPTEMBER 2020 EVALUATIONENGINEERING.COM

31
http://www.EVALUATIONENGINEERING.COM
Evaluation Engineering

Table of Contents for the Digital Edition of Evaluation Engineering
