august2022 - 38

»
FLEET PARTS & COMPONENTS
What's new in products for more efficient fleet operation.
Maintains optimal fluid temperatures
BLE radio enables
The EVantage Electronics Cooling
Package (ECP) from Modine
Manufacturing Company keeps the
traction motor and power electronics
cool for all loads. This complete solution is
designed to maintain optimal fluid temperatures
for the traction motor and power electronics circuits
utilizing multi-zone cooling. EVantage ECPs are designed to
specification with small to large fan arrays that operate only when required to
minimize power draw. The EVantage Thermal Management Systems are designed
to operate as complete, plug-and-play systems controlled through Controller Area
Network (CAN) bus communications. They also include a pre-programmed master
controller for automated operation. Modine thermal management products
are especially suited for zero-emission transit, coach and school buses, specialty
vehicles and trucks, including vans.
For more information visit FleetMaintenance.com/21270679
Separates solid contaminants
from main oil supply
Dieselcraft Fluid Engineering
developed the OC-25 Cyclone Series
Centrifuge for internal combustion gas
and diesel engines. Engine oil pressure
spins the centrifuge rotor at a rate of up to
6,000 rpms, generating a centrifugal force 2,000 times greater than gravity. That
force separates the solid contaminants from the main oil supply. Contaminant
particles less than 2 microns are removed, eliminating the wear and tear on close
tolerance metal parts. The solids/soot is stuck to the inside of the rotor, which
is easily cleaned at over 15,000 miles. The OC-25 requires only a 1/4 NPT tapped
hole to return oil to the engine. It has a universal mounting plate and comes with
all the needed hoses and fittings. Minimum requirements are any engine with a
sump of at least 5 quarts (no maximum) and 12V.
For more information visit FleetMaintenance.com/21274779
two-way communication
The Bluetooth Low Energy (BLE) Tire
Pressure Monitoring System (TPMS) from Sensata
Technologies was developed for vehicle OEMs to help
improve vehicle safety and performance. Sensata's BLE TPMS
replaces the ultra-high frequency (UHF) radio with BLE radio to enable
two-way communication. The BLE TPMS solution is available in both clamp-in
and snap-in configurations, optimized for long battery life, and delivers the same
pressure, temperature, and auto-location capabilities as Sensata's existing UHF
TPMS. With over-the-air updates, drivers can download tire-related features and
software updates, avoiding a trip to the shop for service. BLE two-way communication
also enables cyber security authentication and adds a layer of protection
from being hacked. Sensata will be launching production in the first half of 2023.
For more information visit FleetMaintenance.com/21274780
Real-time live
streaming capabilities
The Ranger Hybrid DVR from
Pro-Vision expands the number
of high-definition cameras supported compared to the 900 Series DVR. It is
backward-compatible with all existing Pro-Vision cameras, supports up to
eight AHD (analog high definition) cameras and an additional DHD (digital
high definition) camera, up from four AHD cameras and two DHD cameras
on the previous model. The AHD inputs feature zero latency, meaning there
is no lag between what the camera captures and what the in-cab video monitor
displays. Additional benefits include enhanced real-time live streaming
capabilities, HDMI HD video output, a timelapse recording feature, and the
ability to support up to one terabyte SD card options.
For more information visit FleetMaintenance.com/21274781
Provides audible alarms and object detection
The Ultrasonic Back-Up Sensor Kit from Continental is easy to set up and
simple to configure as a retrofit or original equipment installation for virtually
any vehicle, including commercial vehicles, RVs, and off-highway agricultural and
material handling equipment. It provides an audible alarm to the operator when
the vehicle comes within 10' of an object and beeps faster as the driver gets
closer to the obstacle. The kit can also be customized for specific distance intervals
to meet OEM specifications. The system delivers a voice announcement of
object distance at specific intervals and integrates with on-board camera/monitor
systems. When paired with a back-up camera system, a monitor will display
an overlay, revealing the active sensor(s) and the object distance from that sensor.
The kit includes four sensors, a central control unit, and a speaker.
For more information visit FleetMaintenance.com/21274783
LEARN MORE
Comes with a sensor, new bung,
weld-on plate, and zip tie.
For Available Discounts
CALL: (855) 889-5776
©2022 Noregon Systems, LLC. All Rights Reserved. JPRO and NextStep are registered trademarks of Noregon Systems, LLC.
This Dorman Products OE FIX Exhaust Gas Temperature (EGT)
Sensor, No. 904-7134, directly replaces the sensor (OE Number
4984179) and comes with a bung repair kit in case the bung is damaged
during removal. The bung repair kit allows direct repair of a damaged
bung instead of replacing the entire exhaust pipe. The kit comes with a
sensor, new bung, weld-on plate, and zip tie.
For more information visit FleetMaintenance.com/21274831
2204FMS_Noregon-ThirdStandard.indd 1
38 Fleet Maintenance | August 2022
3/10/22 3:50 PM

http://www.FleetMaintenance.com/21274780 http://www.FleetMaintenance.com/21270679 http://www.FleetMaintenance.com/21274781 http://www.FleetMaintenance.com/21274779 https://qrco.de/bcppfE http://www.FleetMaintenance.com/21274783 http://www.FleetMaintenance.com/21274831

august2022

Table of Contents for the Digital Edition of august2022