Professional Distributor - 38

UNDER VEHICLE, SUSPENSION & BRAKES
FEATURED PRODUCT
LARGER CATCH AREA
WORKS ON LARGE
AND SMALL "W" SPRINGS

The Thexton GM "W" Rear Brake Tool, No.
832, works on large and small "W" springs
commonly found on older trucks, SUVs and
cars (2009 and older models). The inside
design of this tool allows obstacle-free use
by technicians. This tool is made in the U.S.A.
Specific applications include large springs on
most GM trucks and SUVs older than 2009
(i.e. Silverado, Suburban, Yukon) and small
springs on most GM cars 2008 and older (i.e.
Cavaliers, HHR, Cobalt, G5, Malibu).

The Lisle Corporation 4.5 Gallon Oval Drain Pans, Nos.
17972 and 17982, feature a larger catch area for easier fluid
draining. The drain pans have a height of 6.25" to fit in
tight spaces and their smooth pan design is easy to wipe
out and clean. They also feature a 1.125" outer diameter
spout for quick and easy pouring of used fluids into most
jugs, and have an anti-splash lip to prevent spilling when
carrying or pouring. They are made of high density polyethylene material that is resistant to chemicals and solvents. The drain pans come
in two colors: 17972 is black for oil and 17982 is green for coolant.
Enter #178 at "e-inquiry" on VehicleServicePros.com

Lisle Corporation
712.304.2416
lislecorp.com

Enter #177 at "e-inquiry" on
VehicleServicePros.com

OFFERS FAST AND ACCURATE READINGS

The PCL Air Technology ACCURA QUBE Tire Inflator features style and
simplicity, yet is user-friendly and offers fast tire inflation. With a reading
accuracy of 1 psi, each unit is individually tested and includes a calibration
certificate. The QUBE offers three modes: standard inflate/deflate, tire shop (featuring
overpressure), and nitrogen (top- off
and complete purge).
Enter #179 at "e-inquiry" on
VehicleServicePros.com

LIGHTWEIGHT AND COMPACT DESIGN
The Cal-Van Tools Stretch Belt Installation Tool,
No. 736, is designed to make installing new
stretch belts easier and faster. The design helps
increase the ease of installation and prevent
damage to the belt and pulley. The lightweight
and compact design makes this tool suitable for
working in tight areas.
Enter #180 at "e-inquiry" on
VehicleServicePros.com

FEATURED PRODUCT
KIT CONTAINS SEVEN MASTER
CYLINDER ADAPTERS

The Mityvac Pressure Bleed System, No. MV6840,
is a hydraulic brake and clutch bleeding system
that includes a fluid dispenser with manual pump
(MV6400) and a kit containing seven master cylinder
adapters (MVA6850). The pressure bleed system
forces new brake fluid down through the master cylinder, while air and old fluid are expelled through the bleed
screw(s). A pressure gauge on the dispenser allows control of the
system pressure, and the pressurized reservoir allows the operator handsfree movement to the bleed screws.
Enter #181 at "e-inquiry" on VehicleServicePros.com

Mityvac

314-679-4200
http://bit.ly/brakebleeders

38 Professional Distributor I July 2019 I VehicleServicePros.com

BOTTLES FEATURE BUILTIN MAGNET DESIGNED FOR
SECURE PLACEMENT

The CTA Manufacturing Corp. Brake
Bleeder Bottle, No. 7786, comes with two
brake bleeding bottles. Bottles feature a builtin magnet designed for secure placement.
The bottles are equipped with a nipple top
for placement of tubing. The nipple top also
vents the bottle. Remaining brake fluid drains
back into the bottle. An attached metal wire
with hook adds additional security when
anchored to a nearby suspension component.
Enter #182 at "e-inquiry" on
VehicleServicePros.com

http://www.VehicleServicePros.com http://www.lislecorp.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.bit.ly/brakebleeders http://www.VehicleServicePros.com

Professional Distributor

Table of Contents for the Digital Edition of Professional Distributor