Professional_Tool_And_Equipment_News_December_2019 - 52

Power Tools & Air Tools

DESIGNED FOR 90
PSI COMPRESSED
AIR LINES
The Capri Tools High Performance Air Blow Gun utilizes venturi
nozzles to deliver airflow at 72 cfm. During
normal operation, the venturi nozzle draws
in air and multiples airflow. Should the
nozzle tip become blocked, air pressure
is released to lower than 30 psi, meeting
OSHA's output pressure safety standards.
Airflow level is controlled by turning the flow
control knob, conveniently located above
the handle. The air blow gun is constructed
with a durable aluminum body, premium
matte finish, and features an easy-to-operate ergonomic contour soft grip and heavy
duty trigger.

Circle 139 on card, or enter at "e-inquiry" on
VehicleServicePros.com

USE AS AIR HAMMER OR
PNEUMATIC SLIDE HAMMER

OFFERS 480 FT-LBS OF
MAXIMUM TORQUE

The Lock Technology Texas Twister
Bidirectional Air Hammer Starter Kit,
No. LT855-AH-SK, allows technicians to
convert their air hammer into a pneumatic
slide hammer by installing the included air
lock plug and quick release chuck. The kit
includes the 7" Seal Remover (855-2A), 7"
Univerisal Flat Blade Puller (855-5A), and
6" Double Male 1/2-20 to 5/8-18 Thread
Connector (855-12A). It also includes a
1/4" NPT adjustable brass air flow regulator
and has a vibration dampening system for
reduced user discomfort and fatigue. The
starter kit is ideal for unlimited applications in automotive, aircraft, marine, farm
implement maintenance, and manufacturing industries.

The Puma 1/2" Air Impact Wrench, No.
AT-5641, offers 480 ft-lbs of maximum torque
and reaches 10,000 rpm of free speed. The
tool features a stubby design and
variable-speed trigger
for compactness
and speed control.
The air impact
wrench also
offers high durability and performance
in production, manufacturing, or assembly environments. It weighs 3.31 lbs.

Circle 141 on card, or
enter at "e-inquiry" on
VehicleServicePros.com

Circle 140 on card, or enter at "e-inquiry" on
VehicleServicePros.com

BUILT FOR RUGGED
PERFORMANCE
TAPERED FRONT END FOR
GREATER ACCESS IN TIGHT
SPACES
CLEAN INSIDE OPENINGS AS
SMALL AS 1/4" AND UP TO 1"
The Exair Soft Grip Back Blow Safety Air
Gun uses a small back blow nozzle to deliver
a blast of air to blow debris and liquids
from inside small pipe or hose diameters,
channels, bores, holes, internal threads, and
more. The ergonomic design helps keep the
operator's hand in a comfortable position to
reduce fatigue. An array of holes provides a
forceful back-facing 360-degree airflow. The
nozzle prevents blowing chips further into
a part by blowing debris out the far end of
a pipe or tube. Air consumption is 4.5 scfm
at 80 psig, with a low level sound of 75 dBA.
The nozzle is manufactured to clean inside
openings as small as 1/4" and up to 1". It is
constructed of type 316 stainless steel for
durability and corrosion resistance.

Circle 142 on card, or enter at "e-inquiry" on
VehicleServicePros.com

52

PTEN

DECEMBER 2019

The Ingersoll
Rand W5133
IQV20 Series
3/8" Compac t
Impac t Wrenc h is
designed to deliver 550
ft-lbs of nut-busting torque
and 365 ft-lbs of
maximum torque.
It is 7" in length,
weighs 5.3 lbs,
and has a tapered
front end for greater access in tight spaces.
The tool includes a variable-speed switch
and electronic brake to increase control
while using the tool, four forward power
modes that always operate at max reverse
torque to avoid the need to switch tools
for different tasks. Other features include
spark-free brushless technology, and a reinforced bushing that increases the lifespan of
the motor.

Circle 143 on card, or enter at "e-inquiry" on
VehicleServicePros.com

www.VehicleServicePros.com

The Equalizer Extractor 28V Kit is built
for rugged performance and strength. The
heavy duty extractor runs on 28V Li-ion
batteries that deliver both power and
long run time. The kit includes two 28V
Li-ion batteries rated at 3A hours each,
120V battery charger, two delta blades,
safety glasses, spray bottle, and a plastic
carrying case.

Circle 144 on card, or enter at "e-inquiry" on
VehicleServicePros.com

FLEXIBLE 59" HOSE
The SP Air 1/8" Micro Grinder, No.
SP-1900, features a soft grip, a rear exhaust,
and a flexible 59" hose. The Micro Grinder
can reach a free speed of 70,000 rpm and
has an air consumption rate of 0.7 cfm. The
dimensions are 5.5" long (without the hose)
and 0.67" wide, with a weight of 0.77 lbs.

Circle 145 on card, or enter at "e-inquiry" on
VehicleServicePros.com
http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com
Professional_Tool_And_Equipment_News_December_2019

Table of Contents for the Digital Edition of Professional_Tool_And_Equipment_News_December_2019
