Professional_Tool_And_Equipment_News_July_2019 - 30

HARDLINES
COLOR CODED FOR EASE OF USE

The Ascot 6-pc Wheel Torque Wrench Set is designed to eliminate
guesswork and fatigue from tightening wheel bolts. These wrenches
offer an accuracy of +/- 4 percent, are color coded for ease of use, and
are preset to the most common lug nut torque settings. The wrenches
are one-way (not bidirectional) and feature cushioned ratchet heads.
Includes a Yellow, Blue, Gray, White, and Aqua wrench, as well as the
adjustable torque wrench. Also includes 1/2" drive sockets in 17mm,
19mm, 21mm, 3/4", 13/16", 7/8", and a 6" extension
Circle 115 on card, or enter at "e-inquiry" on VehicleServicePros.com

REMOVES MOST OIL AND
GREASE SEALS

FOR INSTALLING SUBARU A/C
DRIVE BELTS

The Cal-Van Tools Subaru Belt Tool, No. 737,
is designed to make installing drive belts on
Subaru vehicles easier. The tool includes
everything needed to easily install the new,
stiff stretch belt without damaging the belt
or other components. This tool is suitable for
installing new A/C drive belts.

The Lisle Low Profile Adjustable Seal Puller,
No. 55210, has two hook sizes to remove
most oil and grease seals. Where clearance
is a problem, remove the pin to reposition
the head, which can adjust to five different
angles. The adjustable head works great on
front wheel drive transaxles. Also works on
front crankshaft seals without removing the
radiator. Dimensions are 5" W x 19" L x 1" D.
Circle 118 on card, or enter at "e-inquiry" on
VehicleServicePros.com

Circle 117 on card, or enter at "e-inquiry" on
VehicleServicePros.com

FEATURED PRODUCT
REMOVE CLIPS WITHOUT BREAKING THEM

The Steck Manufacturing Retainer Clip Release Tool, No. 21715,
is designed to allow the user to release retainer clips from the outside. By sliding in between the molding and panel, the user can now
access both expansion ears and release the clip without breaking clips
or wasting time locating the back of the clip. The Retainer Clip Release
Tool is 10" long and made out of .015" spring steel with a reinforced
nylon handle that gives it the flexibility and strength to get into tight areas.
The wide opening allows the tool to release all types of retainer clips.
Circle 120 on card, or enter at "e-inquiry" on VehicleServicePros.com

Steck Manufacturing
937-222-0062
steckmfg.com

PTEN

JULY 2019

VehicleServicePros.com

OPENING SPRING AND
LIMITER FOR A USERFRIENDLY HANDLE WIDTH

The KNIPEX Tools 5 1/2" Electronic Super
Knips XL cutting pliers feature an extra 1/2"
for greater stability and cutting performance.
Other features include precision ground
cutting edges without bevel for flush cutting even the finest wires in electronics and
fine mechanics applications. The Electronic
Super Knips XL are ideal for flush cutting
cable ties and include an external opening
spring and opening limiter for a more userfriendly handle width.
Circle 116 on card, or enter at "e-inquiry" on
VehicleServicePros.com

CAN BE USED WITH ANY
WRENCH, BREAKER BAR, OR
HAND DRIVER

The Martin 1/2" Drive Electronic Torque
and Angle Meter, No. PTM-12, is designed to
offer a torque reading with an accuracy level
of +/- 1 percent. The unit features torque ranges from 120 to 300 in-lbs, 10 to 2550 ft-lbs, and
13.5 to 340 Nm. The angle preset adjusts from
5 to 360 degrees and has an angle memory
during ratcheting. The lithium-ion polymer
rechargeable battery can last up to 200 hours
of continuous operation and offers an auto
power off after two minutes. The meter can
be used with any wrench, breaker bar, or
hand driver and is easy to operate. It is also
compliant with both ISO and ASME B107-28
(type 1) standards.
Circle 119 on card, or enter at "e-inquiry" on
VehicleServicePros.com

http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.steckmfg.com http://www.VehicleServicePros.com

Professional_Tool_And_Equipment_News_July_2019

Table of Contents for the Digital Edition of Professional_Tool_And_Equipment_News_July_2019