Professional_Tool_And_Equipment_News_July_2020 - 22

HARDLINES
FEATURES A HIGH GEAR
RATIO OF 1:10

The Gedore Plier Wrench, No. SB 183, combines a metric and SAE standard wrench, along with a
ratchet wrench, making
it an adjustable, universal
tool for bolting, bending,
holding, pressing, and gripping. The tool has a high
pressing and clamping force
with the jaws allowing a tenfold increase of hand force
onto the work piece. The
smooth and paralleled jaws
leave no marks on the materials and synthetic materials,
glass, and chromed parts
remain undamaged, the company says. The plier wrench also
features a sliding mechanism for quick and
easy adjustments from zero to 2", as well as
ergonomically shaped handles.

VAPOR BLASTED TIPS FOR
GREATER DURABILITY

The Sunex Tools 20-pc Combination
Screwdriver Set, No. 1120SS, features a
matte finish to resist flaking and abrasions.
The set also features vapor blasted tips for
enhanced durability, over-molded handles
for user comfort, and a quick reference on the
handle end. The set includes: cabinet (1/8" x
3", 5/32" x 4", 3/16" x 4", 3/16" x 6"); slotted
(1/4" x 1-1/2", 1/4" x 4" with bolster, 1/4" x 6"
with bolster, 5/16" x 8" with bolster, 3/8" x 10"
with bolster); Phillips (#0 x 3", #2 x 2-1/2", #1
x 3" with bolster, #2 x 4" with bolster, #3 x 6"
with bolster); and Torx (T10 x 4", T15 x 4", T20
x 4", T25 x 4", T27 x 4", T30 x 4").
Circle 84 on card, or enter at "e-inquiry"
on VehicleServicePros.com

Circle 83 on card, or enter at "e-inquiry"
on VehicleServicePros.com

SPEED DISK FOR
FINGERTIP CONTROL

The DD2 Dual Drive Ratchet 1/4" Square
Drive from VIM Tools features a 2" long dual
drive ratchet with removable 1/4" square by
1/4" hex adapter. In the handle, there is a 1/4"
square drive for use with extensions and other
tools as an offset wrench to access hard-toreach fasteners. It also features a speed disk
for fingertip control in tight areas, and a
60-degree fine tooth ratchet for high torque
applications. It has a limited lifetime warranty. The tool is also available in 3/8" (DD3).
Circle 85 on card, or enter at "e-inquiry"
on VehicleServicePros.com

DESIGNED TO EASILY CUT
BOLTS, NAILS, AND RIVETS

DESIGNED FOR QUICK AND
CLEAN DEBURRING

The CTA Manufacturing E-Z Chamfer Tool,
No. 3838, is designed for quick and clean
deburring. The key feature is a 5-point cutting
design to efficiently remove burrs and ridges
from bolts, pipes, threaded rods, wheel studs,
bars, and dowels, creating the ideal chamfer
for starting a nut or threading die, the company says. The single-piece, tungsten-molybdenum HSS construction provides durability
and accuracy.
Circle 86 on card, or enter at "e-inquiry"
on VehicleServicePros.com

PTEN

JULY 2020

VehicleServicePros.com

The KNIPEX Tools CoBolt S Compact Bolt Cutter
features a 6-1/4" length and provides high cutting power
to easily cut bolts, nails, and rivets up to
11/64" in diameter. In addition to its
compact design, the cutter has a slim
head designed for better access to confined areas. The CoBolt S has a strong lever action mechanism that allows the user to exert less effort when using the cutter. Below the joint is a
gripping surface for pulling wires with a diameter from 3/64". It also features laser-cut
edges on the blades, which prevent material being cut from slipping. The CoBolt S is
forged and multi-staged oil-hardened from German and chrome vanadium heavy duty
steel, and has induction-hardened cutting edges with a hardness of approximately 64
HRC for cutting thin hard wire, screws, and springs.
Circle 87 on card, or enter at "e-inquiry" on VehicleServicePros.com

KNIPEX

847-398-8520
knipex-tools.com

http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.knipex-tools.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com

Professional_Tool_And_Equipment_News_July_2020

Table of Contents for the Digital Edition of Professional_Tool_And_Equipment_News_July_2020