Professional_Tool_And_Equipment_News_March_2020 - 44

Battery & Electrical Service

SUPPORTS CONVENTIONAL LEAD ACID,
EFB, AGM, AND PURE LEAD BATTERIES
The Midtronics Heavy Duty Battery Diagnostic Service
System, No. DSS-5000 HD, offers 12V and 24V battery pack,
starter, and alternator diagnostics. The DSS-5000 HD features
Conductance Profiling, a patented technology designed to
provide accurate and decisive battery state of health information.
Other notable features include print test results on a networked
printer via built-in Wi-Fi, 3m field-replaceable heavy duty test leads,
optional amp clamp and integrated printer available, as well as a durable 3-pc design that
includes a detachable controller with 5" full-color touchscreen display, tester pod, and
charging dock. It also includes a multimeter cable for cable drop testing.

Circle 107 on card, or enter at "e-inquiry" on VehicleServicePros.com

CHARGES DEAD BATTERIES AS LOW AS 1V
The NOCO Genius10 10A Mountable Battery Charger and
Maintainer is designed for 6V and 12V batteries up to 230Ah,
including lead-acid, lithium, wet, gel, maintenance-free, EFB,
AGM, and calcium batteries. It features an integrated thermal
sensor for improved battery life in addition to hyper-density
technology. The Genius10 also has seven charge modes: 6V,
6V AGM, 12V, 12V AGM, 12V lithium, 12V supply, and 12V repair
mode. Charge dead batteries as low as 1V with Force Mode which
allows manual charging for extreme dead batteries. Genius10 also features the X-Connect
OUT interchangeable connector to utilize the included battery clamps.

Circle 108 on card, or enter at "e-inquiry" on VehicleServicePros.com

FEATURES AN ADJUSTABLE
TRIGGER MODE

LARGE, EASY-TO-READ LCD
DISPLAY WITH BACKLIGHT

The Mac Tools Digital Multimeter, No.
EM721, is designed to offer accurate automotive electronics tests and advanced measurements with DC/AC volts, DC/AC amps,
and resistance. The handheld, batteryoperated multimeter also provides accurate
frequency and pulse measurements with
20,000 count on the high resolution 4,000
count display. It performs diode and continuity tests, has an advanced measure
for sensor and actuators, and a temperature measurement up to 2,498 degrees F
for catalytic converters, fan switches, and
more. The multimeter features an adjustable trigger mode, analog bar graph, USB
communication, and a
backlit display.

The Lisle CAT III Digital Multimeter,
No. 82600, safely and accurately tests
electrical systems. The tool measures AC/
DC voltage/current up to 600V and 10A,
capacitance, diode, duty cycle, frequency,
resistance, temperature, and transistor.
It has 13 functions and an operating temperature range between -40 degrees F to
1,832 degrees F. The multimeter features
manual or auto shutdown after 15 minutes
of inactivity, protection against overload at
all ranges, data hold, low battery indicator,
and warning alarm. It also includes a LED
flashlight for low light situations. Rubber
outer case adds protection against drops
and a stand bracket to hold meter at viewing
angle and test probe holding clips.

Circle 109 on card, or
enter at "e-inquiry" on
VehicleServicePros.com

Circle 110 on card, or enter at "e-inquiry" on
VehicleServicePros.com

CHARGES AND MAINTAINS
12V LEAD-ACID BATTERIES
The PulseTech SP-12, SP-7, and SP-3
SolarPulse Battery Chargers and
Maintainers are designed to charge,
maintain, and desulfate any 12V lead-acid
batteries including VRLA, AGM, gel, and
flooded cell on outdoor vehicles and
equipment, without danger of overcharging or overheating. The SP-12 provides a full
12W of power and is ideal for use on three
to four 12V lead-acid batteries connected in
parallel. The SP-7 provides 7W of power and
is ideal for use on two batteries in parallel,
while the SP-3 provides 3W of power and
is ideal for a use on a single battery. These
solar battery charger maintainers are
durable and supply the needed power in
a sturdy, small-sized panel allowing for
numerous installation options.

Circle 111 on card, or enter at "e-inquiry" on
VehicleServicePros.com

ABLE TO SHARE TEST
RESULTS WIRELESSLY
The Fluke 1587 FC Insulation Multimeter
combines a high performance multimeter with a
1,000V insulation tester.
It wirelessly communicates the results quickly
while the user stays a
safe distance from the
actual test. The multimeter features PI/DAR timed
ratio tests with TrendIt
graphs to quickly identify
moisture and contaminated
insulation problems, temperature compensation to
establish accurate baselines and relevant
historical comparisons, and incorporates
VFD low-pass filter for accurate variable
frequency motor drive measurements. It
also offers historical tracking and trending
of assets to identify insulation degradation
over time and allow real-time decisions to be
made in the field with Fluke Connect Assets
(sold separately).

Circle 112 on card, or enter at "e-inquiry" on
VehicleServicePros.com

PTEN

MARCH 2020

www.VehicleServicePros.com

http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com

Professional_Tool_And_Equipment_News_March_2020

Table of Contents for the Digital Edition of Professional_Tool_And_Equipment_News_March_2020