Professional_Tool_And_Equipment_News_May_2019 - 19

Keeps
power
tools
organized
The Beta Tools
Utilit y Work
Cart, No. CX49,
is a sheet-metal
cart that can be
used as a mobile
work station. It is
designed to keep
corded devices and power
tools organized while providing a work top
for diagnostic tools, battery chargers, or a
computer. This work cart features a slideout keyboard tray and four side cable hooks
to keep power cords organized. The four
small compartments are suitable for smaller
cords. Two swivel casters (one with brake)
make the cart easy to move around. The two
shelves and the side compartments provide
plenty of storage. There is a sturdy handle
for pushing and pulling the cart. The empty
cart weighs 79 lbs.

2-PIECE

Helps user retain
control of tool
The Ingersoll Rand QX Series Ergonomic
Tightening System (ETS) delivers short
pulses of energy into the fastener during
tightening to help the operator retain control of the tool. The motor control algorithm
is designed to minimize the average force
experienced by the operator, helping to protect the user from injury. This tightening system is available on
Ingersoll Rand's
QX Series cordless fastening
tools in pistol and right
angle configurations that
range from 1.33 ft-lbs to
59 ft-lbs of torque.

HOSE
REMOVAL/
INSTALLER SET

Circle 49 on
card, or enter at
"e-inquiry" on
VehicleServicePros.com
MADE IN U.S.A.

Circle 48 on card, or enter at "e-inquiry" on
VehicleServicePros.com

Industrial grade casters
The RPG 2-Ton Service Jack offers a lowprofile design with deep reach and a minimum height for low clearance vehicles.
The jack offers a 24" maximum height for
increased work space, and also features
a universal joint mechanism and safety
bypass system for cylinder protection.
Industrial grade casters are included for
easier transportation, as well as a sturdy,
one-piece handle. To prevent damage to the
vehicle, a foam handle is also included. The
handle length is 50-1/2", overall length is
35-7/8", overall width is 14-5/8", saddle
diameter is 4" and, shipping weight is
106.7 lbs.

Circle 50 on card, or enter at
"e-inquiry" on VehicleServicePros.
com

#854
For cutting plastic
components and soft metals
The KNIPEX Tools 8" High Leverage
Angled Flush Cutter is designed for easy
cutting of plastic components and soft metals. The joint design helps this tool require
less effort for cutting, because the cutting
edge is closer to the rivet. The bevel-free
precision cutting edge provides a flush cut.
Other features include a 20-degree angled
head that provides more space for hands,
gripping surface below the joint for gripping
and pulling, precision cutting edges, and an
opening spring and lock integrated into the
handle. This cutter is made from German
chrome vanadium electric steel, forged, and
oil hardened.

TWO PIECE SET INCLUDES
STRAIGHT TIP FOR PUSHING AND
150 DEGREE TIP FOR PULLING
ROUNDED PROFILE REDUCES
GOUGING AND PUNCTURING OF
HOSE AND MATING CONNECTOR
FOR USE ON VARIOUS HOSES,
SUCH AS RADIATOR, HEATER,
TURBO, AND INTAKE DUCTING
W W W.L ANGTOOL S.COM

Circle 51 on card, or enter at "e-inquiry" on
VehicleServicePros.com
Circle 52 on card, or enter at
"e-inquiry" on VehicleServicePros.com
VehicleServicePros.com

MAY 2019

PROFESSIONAL TOOL & EQUIPMENT NEWS

http://WWW.LANGTOOLS.COM http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com

Professional_Tool_And_Equipment_News_May_2019

Table of Contents for the Digital Edition of Professional_Tool_And_Equipment_News_May_2019