Professional_Tool_And_Equipment_News_September_2020 - 20

Maximum pressure of 200 psi
The Dill Air Controls Air Chuck, No.
7276-EM, features a 25-degree bend for
access to hard-to-reach valves such as
on RV tires. With an overall length of 12", technicians can inflate and deflate with ease. The
air chuck was designed with the technician in mind with its durable, nickel plated assembly
and normally closed chuck type, the company says. It has a 200 psi maximum pressure.

Circle 47 on card, or enter at "e-inquiry" on VehicleServicePros.com

Ideal for gas, AC, and liquid
high pressure fittings
The Lock Technology SAE Thread Chaser
Socket Kit, No. LT999, is designed to
recondition threads on SAE high pressure
male/female fittings. The hollow end tap
slides over the flared end of line to easily
re-thread the female connector. The sockets allow for thread reconditioning with a
flared tip supply line inside the pressure
fitting. The sockets feature a compact
design with a pass-through, bored out center hole on each socket, ideal for gas, AC,
and liquid high pressure fittings common
in heavy equipment, trucking, marine, and
aircraft industries. Made with heat treated
alloy steel.

Circle 48 on card, or enter at "e-inquiry" on
VehicleServicePros.com

For measured
dispensing of lubricants

THE YELLOW JACKET® REFRIGERANT
MANAGEMENT SYSTEM MAKES IT EASY
AND PROFITABLE.
Dial up service revenue by testing every vehicle that rolls
into your shop. Our ManTooth® Wireless Digital Gauge lets
you quickly check an A/C system without pulling up to the
larger RMS unit or a power outlet. Readings are transmitted
to any Bluetooth®-enabled smartphone or tablet. The result?
Maximum revenue with minimum effort.

www.yellowjacket.com
Circle 49 on card, or enter at "e-inquiry" on VehicleServicePros.com

20

PTEN

SEPTEMBER 2020

VehicleServicePros.com

The Samson MC8 OG Series Mechanical
Dispense Valve is a metered control valve
used at the end of a hose assembly for
measured dispensing of lubricants and
antifreeze solutions in tough, intensive
use applications. The valve is ideal for
synthetic and
mineral based
oil, transmission fluid, gear
oil, hydraulic oil and
fluids, and
ATF. It offers
a high precision machined
measuring chamber with tight
tolerances, quality gears, and a stainless
steel shaft to eliminate the need for calibration to adjust for fluid viscosity. It has
a maximum free flow rate of 8 gallons/
minute and a maximum working pressure
of 1,000 psi.

Circle 50 on card, or enter at "e-inquiry" on
VehicleServicePros.com



http://www.VehicleServicePros.com http://www.yellowjacket.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com

Professional_Tool_And_Equipment_News_September_2020

Table of Contents for the Digital Edition of Professional_Tool_And_Equipment_News_September_2020

Editor's Note
Featured New Products
Tool Briefing
Tool Reviews
Diagnostic Tech
Category Spotlight
Marketplace
Big-Time Boxes
Professional_Tool_And_Equipment_News_September_2020 - 1
Professional_Tool_And_Equipment_News_September_2020 - 2
Professional_Tool_And_Equipment_News_September_2020 - 3
Professional_Tool_And_Equipment_News_September_2020 - 4
Professional_Tool_And_Equipment_News_September_2020 - 5
Professional_Tool_And_Equipment_News_September_2020 - 6
Professional_Tool_And_Equipment_News_September_2020 - 7
Professional_Tool_And_Equipment_News_September_2020 - Editor's Note
Professional_Tool_And_Equipment_News_September_2020 - 9
Professional_Tool_And_Equipment_News_September_2020 - 10
Professional_Tool_And_Equipment_News_September_2020 - 11
Professional_Tool_And_Equipment_News_September_2020 - Featured New Products
Professional_Tool_And_Equipment_News_September_2020 - 13
Professional_Tool_And_Equipment_News_September_2020 - 14
Professional_Tool_And_Equipment_News_September_2020 - 15
Professional_Tool_And_Equipment_News_September_2020 - 16
Professional_Tool_And_Equipment_News_September_2020 - 17
Professional_Tool_And_Equipment_News_September_2020 - 18
Professional_Tool_And_Equipment_News_September_2020 - RSC1
Professional_Tool_And_Equipment_News_September_2020 - RSC2
Professional_Tool_And_Equipment_News_September_2020 - 19
Professional_Tool_And_Equipment_News_September_2020 - 20
Professional_Tool_And_Equipment_News_September_2020 - 21
Professional_Tool_And_Equipment_News_September_2020 - 22
Professional_Tool_And_Equipment_News_September_2020 - 23
Professional_Tool_And_Equipment_News_September_2020 - 24
Professional_Tool_And_Equipment_News_September_2020 - 25
Professional_Tool_And_Equipment_News_September_2020 - 26
Professional_Tool_And_Equipment_News_September_2020 - 27
Professional_Tool_And_Equipment_News_September_2020 - Tool Briefing
Professional_Tool_And_Equipment_News_September_2020 - 29
Professional_Tool_And_Equipment_News_September_2020 - 30
Professional_Tool_And_Equipment_News_September_2020 - 31
Professional_Tool_And_Equipment_News_September_2020 - 32
Professional_Tool_And_Equipment_News_September_2020 - 33
Professional_Tool_And_Equipment_News_September_2020 - Tool Reviews
Professional_Tool_And_Equipment_News_September_2020 - 35
Professional_Tool_And_Equipment_News_September_2020 - 36
Professional_Tool_And_Equipment_News_September_2020 - 37
Professional_Tool_And_Equipment_News_September_2020 - Diagnostic Tech
Professional_Tool_And_Equipment_News_September_2020 - 39
Professional_Tool_And_Equipment_News_September_2020 - 40
Professional_Tool_And_Equipment_News_September_2020 - 41
Professional_Tool_And_Equipment_News_September_2020 - Category Spotlight
Professional_Tool_And_Equipment_News_September_2020 - 43
Professional_Tool_And_Equipment_News_September_2020 - 44
Professional_Tool_And_Equipment_News_September_2020 - 45
Professional_Tool_And_Equipment_News_September_2020 - 46
Professional_Tool_And_Equipment_News_September_2020 - 47
Professional_Tool_And_Equipment_News_September_2020 - 48
Professional_Tool_And_Equipment_News_September_2020 - Marketplace
Professional_Tool_And_Equipment_News_September_2020 - Big-Time Boxes
Professional_Tool_And_Equipment_News_September_2020 - 51
Professional_Tool_And_Equipment_News_September_2020 - 52
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/december-2023
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/october-2023
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/september-2023
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/august-2023
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/july-2023
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/june-2023
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/may-2023
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/april-2023
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/march-2023
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/february-2023
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/december-2022
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/october-2022
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/september-2022
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/august-2022
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/july-2022
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/june_2022
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/2022scantoolspecguide
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/may_2022
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/april_2022
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/march-2022
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/february_2022
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/december-2021
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/october_2021
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/september_2021
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/pten_0821
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/pten_0721
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/scantoolspecguide2021
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/pten_0621
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/lift_guide_2021
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/may_2021
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/professional_tool_and_equipment_news_april_2021
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/pten_0321
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_February_2021
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_December_2020
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_October_2020
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_September_2020
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_August_2020
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_July_2020
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_and_Equipment_News_June_2020
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_May_2020
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_April_2020
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_March_2020
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_February_2020
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_December_2019
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_Octoberr_2019
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_September_2019
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_August_2019
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_July_2019
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_June_2019
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_May_2019
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_April_2019
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/PTEN_0319
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/PTEN_0219
https://www.nxtbookmedia.com