April_2022 - 36

Advertorial
AUTEL MAXISYS IA800 INTELLIGENT ADAS - OPTICAL POSITIONING SYSTEM
PROCESS IS PRECISION
W
1 PRE-CHECK >
2 POSITION >
3 PERFORM >
4 PROVIDEDONE!
hen it comes to the calibration of Advanced Driver Assistance Systems
(ADAS) components, there are two essential servicing concepts, follow
the prescribed vehicle manufacturer instructions and document everything
from pre-calibration setup to post-calibration validation.
The Autel Standard Frame ADAS Calibration
System, the MaxiSYS IA800 Intelligent ADAS
optical positioning system adaption package
combined with the Autel calibration software
enable technicians to perform these procedures
via the most efficient and affordable calibration
solution in the industry.
The IA800 employs six high-resolution cameras
and ADAS positioning software to transform Autel's
Standard Calibration frame into a rapid yet
precise frame centering and vehicle distancing
unit, enabling technicians to accomplish target
to vehicle placement in minutes.
Wheel clamps with camera targets are attached to
the rear wheels, and a standing target component
is placed in the front or to the side of the vehicle,
depending on the vehicle make, model and year.
The MaxiSYS tablet, now placed securing on the
frame, is paired with the cameras.
The system recognizes the positioning targets
and calculates the current angle, distance, and
offset position of the frame to the vehicle. The
technician follows the onscreen instructions
to move the frame or adjust its angle until
the current values match the required values.
Checkmarks display for each parameter once the
required position values are met, and that's it,
the vehicle is ready for calibration. Compare that
setup with one using mechanical tools such as
plumb bobs and measuring tape that takes 40
minutes on average.
the vehicle manufacturer's allowed tolerances.
Ensuring a vehicle is correctly aligned is essential
to ensuring a correct ADAS component
calibration. If within OE-specified tolerances,
the technician can proceed to optical positioning
of the frame to the vehicle. A 4-wheel
alignment should be performed if the vehicle
is out of the OE's tolerance range. The IA800
system is incredibly user-friendly, with the
tablet displaying vehicle-specific, step-by-step
instructions for the technician.
This complete solution of software, frame, and
targets, and now with the IA800 optical system
enables technicians to realize a verifiable
component calibration workflow of Pre-Check
(alignment), Position (OE-specified target to
vehicle positioning), Perform (camera, radar.
Lidar, and Night Vision component calibration
with any MaxiSYS tablet with ADAS calibration
software) and Provide (detailed documentation
of complete process).
The IA800 advanced 3D camera
technology provides the most accurate and
fastest calibration frame placement.
Added value to the system is its alignment PreCheck
capability that uses the IA800's camera
system and targeted wheel clamps attached to
all four wheels to determine the vehicle's current
alignment specifications and compare them with
Circle 51 on card, or click " PTEN e-inquiry " on VehicleServicePros.com
TEL: 1.855.288.3587 I WEB: AUTEL.COM
EMAIL: USSUPPORT@AUTEL.COM
FOLLOW US @AUTELTOOLS
©2022 Autel U.S. Inc., All Rights Reserved
SCAN TO WATCH
TRAINING
VIDEOS
YOUTUBE
* USSUPPORT@AUTEL.COM
* 855-288-3587
* WWW.AUTEL.COM
>
http://www.AUTEL.COM http://WWW.AUTEL.COM http://www.VehicleServicePros.com
April_2022

Table of Contents for the Digital Edition of April_2022
