July 2022 - 26

HARDLINES
SPONSORED
Circle 97 on card or click " PTEN e-inquiry "
on VehicleServicePros.com
AUTOMATICALLY ADJUSTS TO
FIT BOLTS OF 3/8 " TO 11/16 "
The NES5 Tight Space Thread Restorer is the
ideal tool to repair damaged external threads in
restricted areas such as the engine and especially
for wheel studs. It's a real time-saver instead of
spending time and money to replace damaged stud bolts. Capacity:
3/8 " -11/16 " (10-18mm) and its two cutters adapt to any pitch, coarse
or fine - a true universal tool and a must-have for all tire shops and
technicians. The tool compliments the full range of NES external
and internal thread repair tools.
" When your threads are a mess, reach for NES " . n
Anglo American Tools
856-784-8600
angloamericantools.com
INCLUDES 11
MAGNETIC TIP BITS
The Vessel Low-Profile Flat Plate Ratchet
Screwdriver Sets, Nos. TX-76U and TX-79U,
are ideal for use in very limited spaces. Both
sets include a ratchet, a 2-pc internal bit
storage, and an 8-pc external storage. The
ratchet measures 4 " in length and has a
total height of 0.7 " after attaching a 0.7 "
long insert bit (13/32 " height without bit
insertion). The TX-76U has a straight ratchet
whereas the TX-79U offers a 15 degree
angle. The magnetic tip bits include: slotted
4mm and 6mm; Phillips PH1, PH2, and PH3;
Torx T20, T25, T27, and T30; and Metric hex:
3mm, 4mm, and 5mm. n
Circle 98 on card or click " PTEN e-inquiry "
on VehicleServicePros.com
PREVENTS JOINT FROM
FALLING TO ONE SIDE
The Titan Professional Tools 1/2 " Dr.10 "
Auto Flex Extension, No. 62110, features
an auto-flex, spring-loaded design which
prevents the joint from falling to one side.
Additionally, the auto flex design allows for
one hand operation. The tool is constructed
of chrome-vanadium steel, has an overall
length of 10 " , and weighs 0.75 lbs. The Auto
Flex Extension is also available in 1/4 " Dr. 6 "
(No. 66109) and 3/8 " Dr. 8 " (No. 68108). n
Circle 99 on card or click " PTEN e-inquiry "
on VehicleServicePros.com
ACCOMMODATES
AWG20 TO AWG12
The OTC Angled Wire Stripping Tool, No.
5950D, is designed to put the stripping dies
on the angled tip, above the pivot point, to
give users the right angle to neatly strip or
cut wires in tough-to-reach places. The proprietary
design allows for a better view for
those tasks done in tight spaces. It's ideal
for wiring service under dash, inside panels,
and in the engine compartment. The tool
accommodates AWG20 to AWG12. n
Circle 100 on card or click " PTEN e-inquiry "
on VehicleServicePros.com
INCLUDES DEEP AND
SHORT METRIC SOCKETS
The CTA Manufacturing 69-pc Euro Metric Tool Set -
3/8 " Drive, No. 10100, includes 14-pc six-point deep metric
sockets, 19-pc six-point short metric sockets, 7-pc metric
hex bit sockets, 12-pc E-Torx sockets, 12-pc T-Torx sockets,
one 3/8 " drive ratchet, two extensions (6 " and 10 " ), one U-joint, and one 1/2 " to 3/8 " drive
adapter with breaker bar hole. n
Circle 101 on card or click " PTEN e-inquiry " on VehicleServicePros.com
26 PTEN JULY 2022 www.VehicleServicePros.com
WORKS IN HARDTO-REACH
PLACES
The Lisle Corporation 1-1/2 " Stainless
Straight and Offset Blade Scrapers, Nos.
83640 and 83650, feature a rigid stainless
steel blade that extends through the handle
to the metal capped end for strength and
durability. With a soft grip handle and hammer
end, the scrapers are ideal for removing
windshield stops and rusted on disc brake
caliper brackets. They also remove carbon
from turbo vanes, urethane, gaskets, and
many other applications. The offset blade
design works in hard-to-reach places. n
Circle 102 on card or click " PTEN e-inquiry "
on VehicleServicePros.com

http://www.VehicleServicePros.com http://www.angloamericantools.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com

July 2022

Table of Contents for the Digital Edition of July 2022