October 2022 - 14

BUILT FOR LIGHTWEIGHT
DURABILITY
The M12 Heated AXIS Jackets and Vests
from Milwaukee Tool are designed to
deliver heat built for lightweight durability.
Redesigned to reach three times faster
heat, these heated products utilize lightweight
and durable carbon fiber heating
elements to bring comfort and warmth
to the jobsite. A hidden battery pass-thru
pocket construction allows for front or back
battery placement, increasing comfort and
flexibility depending on the task. With reengineered
AXIS Ripstop polyester fabric
and reinforced high-wear zones, the heated
AXIS program protects wearers from abrasion
and prevents tears from spreading in
harsh jobsite conditions.
Circle 23 on card or click " PTEN e-inquiry " on
VehicleServicePros.com
NEUTRALIZES ACIDS THAT
CAUSE CORROSION
The Kent Automotive Battery and
Terminal Cleaner is designed to quickly
and effectively dissolve
corrosion deposits. It
neutralizes acids that
cause corrosion. It can
be used on batteries,
terminals, and cables
as well as hold downs
and battery trays. The
aerosol cleaner will
not harm paint, rubber,
or plastic components,
the company
says. Comes in a 13.75
oz. can.
Circle 25 on card or click
" PTEN e-inquiry " on
VehicleServicePros.com
USEFUL FOR SMALL
PARTS IN BLIND SPOTS
The Performance Tool Flexible Magnetic
Pickup Tool, No. W83191, is a rigid, yet flexible
pickup tool that bends to any position
and stays in place. The tool is useful for
small parts in blind spots and hard-toreach
places. The flexible aluminum neck
with knurled aluminum handle measures
24 " , and the 1.5 lb capacity magnetic head
is 5/16 " in diameter.
Circle 24 on card or click " PTEN e-inquiry " on
VehicleServicePros.com
REUSABLE 60 MICRON
SCREEN FILTER
The G-TEC Heavy Duty High Flow Heated
Flusher, No. TTCF-9B, is designed to flush
and clean transmission coolers and lines
or any hydraulic system of contamination,
sludge, and varnish deposits, and particles
from a failed transmission. The TTCF-9B has
a flow rate of 8 gpm to clean heavy duty
transmission cooling systems requiring high
flow rates. Using the same hydraulic fluid
as the hydraulic system being flushed and
cleaned, select from two preset air injected
scrubbing action flush patterns, or perform
a manual flush. Check system cleanliness
with the reusable 60 micron screen filter.
The TTCF-9B also has a preset heater that
heats to 140 degrees F in 45 minutes.
Circle 26 on card or click " PTEN e-inquiry " on
VehicleServicePros.com
MAXIMUM LIFTING
HEIGHT OF 78 "
The Dannmar D4-12A Alignment Lift can
be used to perform two- or four-wheel
alignments and general service work on
cars, SUVs, and light trucks weighing up
to 12,000 lbs. The ALI-certified lift comes
with free-floating, heavy duty turnplates
and rear slip plates built into the runways
for maximum convenience. The lift has
a maximum lifting height of 78 " and features
an automatic leveling system with
multiple auto-leveling locking positions
in each column and a push-button safety
release. The non-skid runways adjust for
various tread widths. The D4-12A runs on
an electric/hydraulic power system with a
single hydraulic cylinder mounted under
a runway for convenience and protection.
Circle 27 on card or click " PTEN e-inquiry " on
VehicleServicePros.com
SPECIFICATIONS:
Lifting capacity
Min. 4-wheel alignment
12,000 lbs
106 "
Max. 4-wheel alignment 158.5 "
Max. 2-wheel alignment 163.5 "
Max. lifting height
78 "
14 PTEN OCTOBER 2022 www.VehicleServicePros.com
http://protoolequipment.hotims.com/r5/search.asp?action=search&return_by_category=y http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com
October 2022

Table of Contents for the Digital Edition of October 2022
