October_2021 - 23
NEW PRODUCTS
HAS A 4MM DIAMETER
CAMERA PROBE
The Oasis Scientific Vividia USB/Wi-Fi
Rigid 2-Way Articulating Borescope
Videoscopes, Nos. W2430 and W2460, are
rigid borescopes with a pivoting probe
head. The camera probe is small at 4mm
(0.157 " ) diameter and can be turned in two
directions with a maximum bending angle
in each direction to more than 180 degrees.
The total rigid probe tube length for W2430
is 16 " and 28 " for W2460. The built-in Wi-Fi
and USB connection is compatible with
iPhones, iPads, Android devices, and
Windows PC.
58
Vividia W2240 is the flexible probe
version, with a probe tube length of
1m and a probe camera diameter
of 4mm.
AUTO SHUT-OFF WHEN
RECOVERY IS COMPLETE
The JB Industries F6-BOOST BLDC
Ignition-Proof Refrigerant Recovery Unit
is designed to provide users fast, reliable
refrigerant recovery of ARHI groups III, IV,
and V refrigerants. Its two-cylinder, oilless
compressor and long-lasting pistons are
housed in a lightweight, ergonomically
designed, and easy-to-use unit. The unit
features built-in purge functionality to prevent
cross-contamination, non-pressurized
vented crankcase to prevent the refrigerant
from damaging bearings or seals, auto shutoff
when recovery is complete, status indicator
light, and an easy-to-use interface with
2 " high/low gauges. It has a recessed folding
handle with rubber grip and padded shoulder
strap as well as a 10' locking power cable
and Velcro cord wrap.
59
RECALIBRATES ANY TYPE OF TORQUE WRENCH
The VIM Tools Digital Angle and Torque Meter 1/2 " and 3/8 " Sq. Dr., No. DATM1238, is
designed to turn any ratchet or breaker bar into a torque/angle measuring tool. The meter
can be used to recalibrate any type of torque wrench and has 30 memory settings for torque
and 30 for angle. Peak and track modes are available for torque reading
and ratchet mode is available for angle reading.
A color-changing display and audible alarm indicate
progress when reaching the target value
(green backlight below 80 percent, orange above
80 percent, and red at 100 percent or above). The
compact and lightweight tool also has a powersaving
mode that turns on after two minutes
of inactivity.
61
STARTS CHARGING AT 0V
The Schumacher 60A 6V/12V Fast Charger,
No. DSR134, is designed for flooded, AGM,
and gel cell including spiral cell and orbital.
The unit offers four distinct charging modes,
start/stop interface, and a large, easy-toread
display that provides step-by-step
instructions. With patented Thermal
Runaway protection, reverse polarity and
short circuit protection, and overcharge
protection, the unit allows fast and safe
charging. In addition, the DSR134 has a
recovery setting used to automatically
recover and charge severely discharged 6V
and 12V batteries. The unit has a powder
coated steel case for durability and comes
with 7' 4GA ultra-flexible cables.
60
DOUBLE-DIPPED IN NITRILE
BUTADIENE RUBBER
The Brass Knuckle SmartSkin Nitrile
Gloves are double-dipped in nitrile butadiene
rubber (NBR) to offer wearers additional
protection and grip. SmartSkin
starts with a thin gauge, 18 mil nylon shell
with a full NBR over
coat. Then a second
coat of NBR is added
to full fingers and
palm. This second
coat has a sandy finish
that provides
additional grip, even
when wet. The gloves are
latex-free, puncture and
tear resistant, and provide
protection from
most liquids, including chemicals
and oils. They're also
designed to cover the wrist and
lower forearm.
62
VehicleServicePros.com OCTOBER 2021 PROFESSIONAL TOOL & EQUIPMENT NEWS 23
http://www.VehicleServicePros.com
October_2021
Table of Contents for the Digital Edition of October_2021
Editor's Note
New Products
Diagnostic Tech
Tool Briefing
Tool Reviews
People's Choice Winners
Category Spotlight
Bit-Time Boxes
October_2021 - 1
October_2021 - 2
October_2021 - 3
October_2021 - 4
October_2021 - 5
October_2021 - 6
October_2021 - 7
October_2021 - Editor's Note
October_2021 - 9
October_2021 - New Products
October_2021 - 11
October_2021 - 12
October_2021 - 13
October_2021 - 14
October_2021 - 15
October_2021 - 16
October_2021 - 17
October_2021 - 18
October_2021 - 19
October_2021 - 20
October_2021 - 21
October_2021 - 22
October_2021 - RSC1
October_2021 - RSC2
October_2021 - 23
October_2021 - 24
October_2021 - 25
October_2021 - 26
October_2021 - 27
October_2021 - 28
October_2021 - 29
October_2021 - 30
October_2021 - 31
October_2021 - 32
October_2021 - 33
October_2021 - 34
October_2021 - 35
October_2021 - 36
October_2021 - 37
October_2021 - Diagnostic Tech
October_2021 - 39
October_2021 - 40
October_2021 - 41
October_2021 - Tool Briefing
October_2021 - 43
October_2021 - 44
October_2021 - 45
October_2021 - 46
October_2021 - 47
October_2021 - Tool Reviews
October_2021 - 49
October_2021 - 50
October_2021 - 51
October_2021 - People's Choice Winners
October_2021 - 53
October_2021 - 54
October_2021 - 55
October_2021 - 56
October_2021 - 57
October_2021 - 58
October_2021 - 59
October_2021 - Category Spotlight
October_2021 - 61
October_2021 - 62
October_2021 - 63
October_2021 - 64
October_2021 - 65
October_2021 - 66
October_2021 - 67
October_2021 - 68
October_2021 - 69
October_2021 - 70
October_2021 - 71
October_2021 - 72
October_2021 - 73
October_2021 - Bit-Time Boxes
October_2021 - 75
October_2021 - 76
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/december-2023
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/october-2023
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/september-2023
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/august-2023
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/july-2023
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/june-2023
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/may-2023
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/april-2023
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/march-2023
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/february-2023
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/december-2022
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/october-2022
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/september-2022
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/august-2022
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/july-2022
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/june_2022
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/2022scantoolspecguide
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/may_2022
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/april_2022
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/march-2022
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/february_2022
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/december-2021
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/october_2021
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/september_2021
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/pten_0821
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/pten_0721
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/scantoolspecguide2021
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/pten_0621
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/lift_guide_2021
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/may_2021
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/professional_tool_and_equipment_news_april_2021
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/pten_0321
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_February_2021
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_December_2020
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_October_2020
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_September_2020
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_August_2020
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_July_2020
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_and_Equipment_News_June_2020
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_May_2020
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_April_2020
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_March_2020
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_February_2020
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_December_2019
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_Octoberr_2019
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_September_2019
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_August_2019
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_July_2019
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_June_2019
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_May_2019
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/Professional_Tool_And_Equipment_News_April_2019
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/PTEN_0319
https://www.nxtbook.com/endeavor/professionaltoolandequipmentnews/PTEN_0219
https://www.nxtbookmedia.com