Professional_Tool_And_Equipment_News_April_2021 - 67

LT886 Radiator Rocket Coil and Line Cleaner

ooling coils for radiators, transmissions, oil and fuel
lines are numerous in today's heavy duty work vehicles. It's common procedure today for trailer truck,
dump truck, earth moving and tractor vehicles to require
daily line and coil cleaning in order to run cool and efficient.
High pressure water sprayers get the job done but leave a mess
for the shop and the tech under the vehicle. The Radiator Rocket
runs on air power which eliminates that problem. Four inch air
slot in brush head puts out maximum air cleaning volume and
pressure without damaging coils, lines or fins.
For tight accessed stacked multiple coils/radiators, the brush
bar inside brush head is removable for easy access.
Cleaning head is always 90° toward radiator fins for maximum cleaning efficiency and coil protection.
Tool shaft can be configured in 3', 2', or 1' lengths to access
limited spaces. Includes 1/8 " NPT air control valve. Eliminates
need for raising vehicle on jacks or lifts to access buried coils
under vehicle. Ideal for in field use.
Keep your shop techs, radiators and coils clean with the air
powered Radiator Rocket. n

LT886 Radiator Rocket.

Brush head up close.

See it work
on YouTube.

LT1940 Series
Kentucky Kicker Shockit Driver Kits
ltitools.com

n innovative new tool concept to access and
remove the most frozen nuts and bolts. Convert
any 3/8 " - 1/2 " - 3/4 " drive socket into an air hammer
powered Shockit Socket.
Utilizes hypersonic air hammer repetitive vibrations to free
bolts and nuts without galling fastener threads.
LT1940 series kits are available in 3 sizes. (LT1940-3/8
3/8 " Shockit Driver Kit, LT1940-1/2 1/2 " Shockit Driver Kit
and LT1940-3/4 3/4 " Shockit Driver Kit).
Each LT1940 series Shockit Driver Kit includes a Short
Throw Shockit Driver, Long Throw Shockit Driver, Drive Plug
which has a low profile design for air hammer punch applications in tight accessed spaces and a Drive Plug Breaker Bar that
allows for simultaneous breaker bar/ratchet and air hammer
punch operation.
To operate, insert either the Drive Plug or Drive Plug
Breaker Bar into the Short Throw or Long Throw Shockit
Driver then insert into the socket that you will be using and
place on the fastener you want to remove. Now insert one
of three different length non-turning punches into your air
hammer and insert drive tip end of punch into recessed holes
on Shockit Driver and engage air hammer to remove fastener.
Insert your breaker bar or ratchet into Drive Plug Breaker Bar
for even more power to remove fasteners.

Three, slotted non-turning punches are available in a kit
(LT1910PK Shockit Punch Kit) and are also available separately
in 5.5 " (LT1910PS), 11 " (LT1910P) and 22 " (LT1910PL) lengths
to access and remove the most difficult fasteners.
Patented unique design. Made to precise German
DIN standards.
Get kicking with Kentucky Kicker Shockit Driver Kits
available from your mobile tool distributor in May 2021. n

In use with
your ratchet or
breaker bar.

LT1940-3/4 3/4 " Shockit Driver Kit shown.
Shockit Driver Kit
with Punch in use.

See it work
on YouTube.
LT1910PK Shockit Punch Kit.

Circle 114 on card, or enter at " e-inquiry " on VehicleServicePros.com

www.VehicleServicePros.com

APRIL 2021

PROFESSIONAL TOOL & EQUIPMENT NEWS

http://www.ltitools.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com

Professional_Tool_And_Equipment_News_April_2021

Table of Contents for the Digital Edition of Professional_Tool_And_Equipment_News_April_2021