PTEN_0321 - 17

PRODUCTS
new tNEWooLs
PROVIDES FAST AND
ACCURATE ROTOR/
FLYWHEEL RESURFACING

The Ranger RL-8500 Combination Brake
Lathe uses independent
DC ser vo motors to
control the cross-feed
and spindle feed
drives, allowing for
a precision cut
every time and
eliminating the
need for complex
mechanical gear
boxes and transmissions typically found on
mechanically driven brake lathes. It provides fast and accurate rotor/flywheel and
drum/flywheel resurfacing. In addition, it
works on all cars or trucks, both foreign
and domestic, with hubless drums, rotors
(hole sized 2-5/32 " to 4 " ), and composite
rotors (hole sized 4 " to 6-1/4 " ).

60150 reLay pro® 12V and 24V reLay tester

A straightforward relay tester that will easily and quickly test most 12
and 24 volt DC automotive relays. Tests relays by simply clipping the
test leads onto the relay terminal pins using a 12 or 24v DC power
source. Tests a wide range of 4 and 5 pin relays. Including shielded, nonshielded, relays with different pin sizes and 4 pin normally closed relays
that other testers may incorrectly show fail. Automatically determines the
relay configuration so the fully insulated gator clips can be connected in
any order. Eliminates guesswork because you don't need to connect to
specific pins, like other testers. 45 " power leads with heavy-duty gator
clips provide a secure connection to the power source.

17480

17460

Circle 44 on card, or enter at " e-inquiry " on
VehicleServicePros.com

17460 CurVed Hose CLaMp pLiers
17480 straigHt Hose CLaMp pLiers
72600 ManiFoLd driLL teMpLate For dodge® 4.7L

LIGHT HEAD PIVOTS
110-DEGREES

The Milwaukee Tool M12 ROVER Service
and Repair Flood Light w/USB Charging,
No. 2367-20, delivers 700
lm of TRUEVIEW
high definition output, easily lighting
a workspace for up
to 24 hours when
equipped with an
M12 Redlithium XC
4.0 battery pack. For
improved control
over the direction
of the lighting, the
M12 ROVER features a
light head that pivots 110-degrees, and a
strong rear-facing magnet to easily attach
it to jobsite surfaces. The light is optimized
for both handheld use and stationary task
lighting. Additionally, it has a USB port for
device charging and an integrated keyhole
for hanging on non-metallic surfaces.

Circle 45 on card, or enter at " e-inquiry " on
VehicleServicePros.com

Removes broken exhaust manifold bolts on Dodge®
4.7L motors without damaging the cylinder head.
Tapered bolts center base plate over bolt holes and
slip fit bushing allows you to move from hole to hole
without moving base plate. The screw extractor is then
used to remove the broken bolt. Includes bushing to
drill to tap size when extractor cannot be used.

Cross-cut tip design that grip most hose clamps from
multiple angles. 17460 has an ergonomic curved
design making pliers easy to use in hard-to-reach
areas. Ratcheting lock mechanism holds the clamp
in an open position for hands-free use. Dual material
grips for comfort. Works on most spring hose clamps.

59650

37530 tiMing tooL For gM®, 4 pC.

For use when servicing the timing chain on GM 2.8,
2.9, 3.0, 3.5, 3.6, 3.7, and 4.2L high-feature V6 and
in-line 4, 5 and 6 cylinder engines. Helps preserve
camshaft alignment during timing chain removal
and installation.

59670

59650 ratCHeting serpentine BeLt tooL Kit
59670 serpentine BeLt tooL Kit

Now packaged individually in blow molded plastic
cases. Choose the kit with your preferred handle,
standard or ratcheting (with freewheel for maximum
range). Both sets also include the new 17mm socket.
They also include: 3/8 " square drive, 1/2 " square drive,
13mm, 14mm, 15mm, 16mm, 18mm, 19mm low
profile sockets. Both sets also come with an extension
for hard-to-reach idler pulley.

71670 Large tap soCKet set, 5 pC.

Five larger sizes in a convenient set. Fit 5/8 " , 11/16 " ,
3/4 " , 7/8 " and 1 " (16mm, 18mm, 22mm and 25mm)
taps manufactured to M.C.T.I. standards. Ideal for use
in restricted areas where a T-handle won't fit.

LisLe Corporation * po Box 89 * CLarinda, ia 51632-0089
712-542-5101 * Fax 712-542-6591 * www.lislecorp.com
Circle 46 on card, or enter at " e-inquiry " on VehicleServicePros.com
VehicleServicePros.com

MARCH 2021

PROFESSIONAL TOOL & EQUIPMENT NEWS

http://www.lislecorp.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com

PTEN_0321

Table of Contents for the Digital Edition of PTEN_0321