PTEN_0321 - 18

NEW PRODUCTS
INCLUDES ATTACHMENTS
AND A HEAVY DUTY CART

The Inductor Pro-Max Fully Loaded
from Induction Innovations uses highfrequency magnetic fields to
generate Invisible Heat
to easily remove parts
bonded to metal. In seconds, users are able to
release seized hardware from corrosion or
thread lock compounds
and other adhesives
without damage and
safety risks of an open
flame, the company
says. The Pro-Max Fully Loaded
includes the Pro-Max induction
heating system, along with ergonomically
designed attachments, some molded in
high temp, impact, and chemical resistant
epoxy polymers. It also features a heavy
duty cart made of 22 gauge steel and powder coat finish.

PROVIDES HI-RES
IMAGING FOR FULL
UNDERCARRIAGE VISIBILITY

The UVeye Helios Underbody Scanner is a
drive through solution designed to scan the
underbody of any vehicle for mechanical
issues including leaks, rust, broken parts,
or modifications. Helios can be installed
in both a stationary or a mobile version at
the entrance of repair shops or dealership
lanes. It provides transparency and certainty exposing any issue within seconds
with no need for heavy machinery, the
company says. Reports can also be sent
directly to the customers and save technicians time while improving efficiency.

Circle 70 on card, or enter at " e-inquiry " on
VehicleServicePros.com

The Innova 5420 Power Check powered
circuit tester lets users quickly and
safely test and apply power/
ground to switches, relays,
fans, and electrical circuits to
see if they power on to troubleshoot a range of automotive issues.
Power output options include 3V, 5V,
and 12/24V applications. Its
digital screen and twocolor LEDs display the
system voltage (red = low
/ green = good) reading
and power/ground for
quick readings of electrical
circuits. Innova's Power Check
also features a proprietary swivel-head,
which enables the user to access difficultto-reach areas. Its 10 MegOhm impedance
provides enhanced safety for automotive
electrical system testing such as inputs to
a car or truck's PCM.

Circle 74 on card, or enter at " e-inquiry " on
VehicleServicePros.com

18

PTEN

MARCH 2021

VehicleServicePros.com

The Pro-Cut International B17 Bench
Lathe is designed to quickly change over
brake discs to drums due to its P2 cutting
head that has a disc twin cutter and drum
cutter on one tool holder that pivots. The
drum or rotor feed is automatically controlled by head position. The B17 offers
clean and smooth direct current power for
quiet operation and ideal surface finishes. Users have full control of arbor speed,
meaning there is no need to change belts
between low and high speed. The B17 also
features a heavy duty mobile tool cabinet
with three drawers, a shadow-less arbor
ring light and gooseneck LED lamp, and
a command module that tracks usage
and ROI.

Circle 69 on card, or enter at " e-inquiry " on
VehicleServicePros.com

Circle 71 on card, or enter at " e-inquiry " on
VehicleServicePros.com

FEATURES A
PROPRIETARY SWIVEL-HEAD

TRACKS USAGE AND ROI

REPLACES THE WHEEL
BEARING DIRECTLY ON
THE VEHICLE

The Pacific Automotive Industries
Generation 2 Compact Wheel Bearing
Extension Set, No. 20-00012, is designed
to make it possible to
replace front or rear
wheel bearings
dire c tly on
the vehicle within
1 5 to 30
minutes. The tool
is engineered to hold
the bearing correctly so
during installation there is little chance of
cracking the bearing cage. This is accomplished by pressing in the bearing only
using the outside of the bearing housing.
According to the company, no wheel alignment or ADAS updates are needed after
replacement. The set and method will
demount and correctly install Generation
2 Compact wheel bearings (HBU 2.1).

Circle 73 on card, or enter at " e-inquiry " on
VehicleServicePros.com

FEATURES A 6 TO
12.5 TON CAPACITY

The Snap-on Heavy Duty Manual
Interchangeable Master Puller Set, No.
CJ2500, is designed to provide technicians next level access and power for a
wide variety of pulling applications such
as removal of gears, sprockets, pulleys,
bearings, bushings, sleeves, and more.
The components create 48 different puller configurations while the spring-loaded
locking mechanism reduces the chances of
the puller slipping off of the work surface as
its jaws easily latch on for both inside and
outside pulling applications. The reversible
jaw design and two-position yokes accommodate multiple jaw lengths up to 15 " . The
one-piece jaw construction of the CJ2500
doesn't use pins or bolts, providing a tough
and safe jaw with six jaw sets.

Circle 72 on card, or enter at " e-inquiry " on
VehicleServicePros.com
http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com
PTEN_0321

Table of Contents for the Digital Edition of PTEN_0321
