PTEN_0621 - 50

Lifts, Jacks & Stands
ADJUSTABLE
FROM 48.75 " TO 74.5 "
The BendPak MLS-18 Mobile Jack Stand
is designed to provide added support and
peace of mind when work on a heavy duty
vehicle on a lift may cause a shift in its
center of gravity. Each MLS-18
Mobile Jack Stand has a rated
RATED FOR 500 LBS
The Kent Automotive Lift King Heavy
Duty, No. 1620192, mechanically lifts and
moves semi-truck hoods, car or truck
doors, and pickup beds safely and efficiently
with one operator. The multi-use lift
is rated for 500 lbs and comes with a
1,600-lb brake winch. It has passed testing
at 1,000 lbs, the company says. The bundle
contains one lift and one semi hood attachment.
The semi hood attachment allows
additional tilting mobility for body repair
and painting.
163
PULL AND TWIST
HANDLE FOR
CONTROLLED LOWERING
The Martins
Industries
capacity of 18,000 lbs and can
be adjusted from 48.75 " to
74.5 " in height to reach lifting
points more than 6' in the air.
Additionally, it features a
tripod design, foldaway
transport handle, and 3 "
diameter wheels. It's ideal
for use in sets of four, six,
or eight.
164
In choosing a lift for your
shop, one of the most
important questions to consider
is: What's the heaviest vehicle
you'll ever be raising to service?
Answering this one question
will give you the answers in your
search to find the best
equipment fit, whether you are
lifting a fire truck or an everyday
passenger car. "
- Steve Perlstein, Mohawk Lifts
2-ton
COMES WITH A
THICK CROSSBAR FOR
ADDED SUPPORT
The Advantage SS-11000-WD Four-Post
Lift is nicknamed " Big AL " , according to the
company. The lift provides users 3 " longer
runways, an additional 10 " of drive
through clearance, and an extra 10 " from
outside of the runways compared to the
Advantage DX-9000-XLT Four-Post Lift. It
also comes with a thicker crossbar for
added support and increased cables and
pulleys to handle the added capacity. The
SS-11000-WD accommodates dually
trucks and other wider trucks such as the
Ford Raptor.
165
Professional Floor Jack, No. MFJ-P2T, has
a lifting capacity of 2 tons, making it ideal
for passenger cars, SUVs, and pickup
trucks. Its low-profile design allows users
to roll it under as little as 7.5 cm of
clearance. The protective sleeve along the
lifting arm and the rubberpadded
saddle
prevent
damaging
the vehicle when
pumping. When work is done,
simply pull and twist the handle
counterclockwise for a smooth
and controlled lowering. It also
has a foot pedal that allows it to
reach the jacking point in no
time for a quick set up and
durable nylon wheels
to
maneuver with ease without
scratching garage floors.
166
DESIGNED TO HANDLE
HEAVY ENGINE, DRIVE
AXLE ASSEMBLIES,
TRANSMISSIONS, AND MORE
The ATD Tools 2,500 lb Powertrain
Lifting Table, No. ATD-7478, is engineered
to handle heavy engine, drive axle assemblies,
transmissions,
electric vehicle
batteries, and other vehicle components.
Its scissor lift design allows access to all
four sides of a component and its independent
adjusting screws tilt the table 11
degrees side-to-side, front-to-back. The lift
table includes two sets of heavy duty ratcheting
tie down straps as well as two 8 "
diameter locking swivel casters for easy
movement and secure positioning. The
table measures 19.7 " by 32 " and has an air/
hydraulic foot pump with 10' hydraulic hose
extension.
167
50 PTEN JUNE 2021 www.VehicleServicePros.com
http://www.VehicleServicePros.com
PTEN_0621

Table of Contents for the Digital Edition of PTEN_0621
