PTEN_0721 - 23

HARDLINES
ALLOWS FOR QUICK
TIGHTENING WHEN
RATCHETING IS NOT
REQUIRED
The VIM Tools 1/4 " and 10mm Hex
Reversible Bit Ratchet with Removable
1/4 " and 3/8 " Square Drive Adapters,
No. HBR1046, allows for quick tightening
or loosening when ratcheting is not
required due to its quick-disk on the drive
head. Its reversible 72-tooth gear head
requires 5 degrees of sweep and the opposite
end has a reversible 60-tooth gear
head that requires 6 degrees of sweep.
The small, low-profile ratchet is made of
heat-treated Cr-V alloy steel and works
with all 1/4'' bits and 10mm fasteners.
It includes 1/4'' and 3/8''
square drive inserts.
87
COMBINES FOUR KITS
INTO ONE MASTER KIT
The Schley Products Master Harmonic
Damper Pulley Puller Kit, No. 18000, accommodates
applications including 2018 and later
Ford Coyote engines, various models and production
years of GM/Chevrolet, and other vehicles
equipped with 3- and 6-spoke pulleys. It also
accommodates many Ford, Dodge, Chrysler, GM
and other domestic vehicles along with some
import vehicles and compact cars equipped with
3-, 4-, and 6-spoke pulleys. The kit combines
four harmonic damper pulley puller kits
(Nos. 64900B, 18350, 17400, and 13450A)
into one master kit. It also includes extra
set of spring washers and spare clevis
pin and comes in a blow molded box.
88
Schley Products Inc.
714-693-7666
sptool.com
OFFERS SIX DIFFERENT ENDS
FOR VARIOUS USES
The Cal-Van Tools 3-pc Non-Marring Pick
Set, No. 112, includes three double-ended
picks, providing six different ends for various
uses, from interiors to engines. The
picks are delicate enough for removing
switches from a dash panel or replacing
injector O-rings. Their design also allows
access into hard-to-reach areas to remove
a clip or remove old gasket material. The
pick set is a balance of strength and forgiveness,
the company says.
89
AVAILABLE IN 1/4 " ,
3/8 " , AND 1/2 "
The Sonic Tools NEXT Ratchet
features an ergonomic design to
provide optimum contact and a
higher power transmission up to
558.33 ft-lbs. Its 60 gears enables
accuracy and efficiency. In addition,
the narrow head offers the
ability to reach into confined
spaces. The NEXT ratchet is available
in 1/4 " , 3/8 " , and 1/2 " . The
1/4 " offers 66.38 ft-lbs of maximum
torque, the 3/8 " offers 221
ft-lbs of maximum torque, and the
1/2 " ratchet offers 558.33 ft-lbs of
maximum torque. 90
FEATURES A
4-DEGREE SWING ARC
The Olsa Tools 3-pc Swivel Head Ratchet
Set contains a 1/2 " , 1/4 " , and 3/8 " swivel head
ratchet. The ratchet heads rotate 270 degrees
to accommodate a wider range of angles,
making them ideal for working in tight spaces.
Additionally, the 90-tooth gear-to-gear mechanism
requires a 4-degree swing arc. With
their molded handles and non-slip grip control,
the ratchets are designed to reduce hand
fatigue and slippage. Made with industrialgrade
chrome vanadium steel, the ratchets
are corrosion-resistant. The set has a limited
lifetime warranty.
91
FOR MORE INFORMATION ON THESE PRODUCTS,
CLICK ON " PTEN E-INQUIRY "
at VehicleServicePros.com
OR CIRCLE THE NUMBER ON THE CARD.
VehicleServicePros.com JULY 2021 PROFESSIONAL TOOL & EQUIPMENT NEWS 23
http://www.sptool.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com
PTEN_0721

Table of Contents for the Digital Edition of PTEN_0721
