PTEN_0821 - 12

NEW PRODUCTS
PAD STARTS AT 1,000 GRITS
The Insta Finish Softback Sanding
Sponge - Fine, Grits 1,000-1,200 and
1,500 features a foam disc that provides
an even surface pressure to the abrasive
fabric regardless of the form variations of
the sanded material. This prevents the
abrasive fabric from cutting through the
lacquer layer, for example at sharp edges
and rounding. The pad starts at 1,000 grits
then diminishes to 1,200 and lastly 1,500,
no need to change sandpaper.
28
ABLE TO MANAGE
UP TO 22 WHEELS
The HD TPMS from CanDo is an activation
tool with functionalities designed for the
maintenance of trucks and buses. The unit
reads sensors for psi, temperature, sensor
ID, and battery status. It works for twin
wheels and is able to manage up to 22
wheels. The tool is compatible with today's
leading truck and
bus TPMS sensors
and can be
updated with
n e w h e a v y
transport vehicles
as soon as
they are introduced,
the company
says.
31
FOR FORD GAS 4.6L, 5.4L,
AND 6.8L ENGINES
The ProMAXX Rocky ProKit is designed
to assist technicians in reducing cost, risk,
and liability in the repair and replacement
of broken exhaust manifold mounting
studs for Ford gas 4.6L, 5.4L, and 6.8L
engines. It's for Crown Victoria, Mercury
Grand Marquis, Mountaineer, Ford
Explorer, SportTrac, F-series, Super Duty
Ford trucks, Ford Econoline Vans, and Ford
drive chassis. Rocky offers speed, efficiency,
and accuracy in drilling and subsequent
assistance in the removal of the
remaining portion of a damaged exhaust
manifold mounting stud. There's no need
to use a center punch to mark the damaged
stud, the company says. It can be
mounted in any of eight orientations,
accessing every stud.
29
DOUBLE-STITCHED IN HIGHWEAR
AREAS
The Brass Knuckle SmartShell Safety
Gloves, No. BKCR4499, are engineered to
provide impact protection, cut protection,
ideal grip in wet conditions, high visibility,
and comfort. The gloves have machine knit,
ultra-high-molecular-weight polyethylene
(UHMWPE) with ANSI cut level A5 protection
on the palms. The thermoplastic rubber
padding is sonically welded to the back
of the gloves for protection
from impact hazards
and the gritty black
nitrile palm coating
offers ideal wet
grip. The gloves
naturally shape
to the contours of
the hand and flex
points, helping to
ensure maximum comfort
and increased compliance.
For extra durability,
SmartShell is doublestitched
in high-wear areas
including fingertips, index
finger, and palm.
30
FOR USE ON MOST FORD,
CHRYSLER, GM, AND VW
POWER STEERING PULLEYS
The OEMTOOLS Power Steering Pulley
Remover/Installer, No. 37031, fits pulleys
with hub diameters measuring
1-1/8 " , 1-1/4 " , 1-5/16 " , and 1-3/8 " . It
includes two screws for use on most
Ford, Chrysler, GM, and VW power steering
pulleys with Saginaw, Thompson,
and Ford C111 and C2 pumps. It also
pulls pulleys on GM belt driven vacuum
pumps and the pressed-on water pump
pulleys of GM V6 engines. It includes a
molded storage carrying case to keep
tools organized and secure.
32
FOR MORE INFORMATION ON THESE PRODUCTS,
CLICK ON " PTEN E-INQUIRY "
at VehicleServicePros.com
OR CIRCLE THE NUMBER ON THE CARD.
12 PTEN AUGUST 2021 VehicleServicePros.com
HOW TO REMOVE A PULLEY:
* Lubricate the pressure screw before using.
* Place the collar halves around the pulley so
it fits up against the lip.
* Insert the pressure flange assembly into
the collar halves.
* Slide the collar retaining ring over the
collar halves.
* Insert the pressure screw into
the pump and turn.
* While using a wrench to hold the pressure
flange use a second wrench to turn the
pressure screw to remove the pulley.
Do not use air tools or power tools.
Watch a demo video here:
VehicleServicePros.com/21229347
http://www.VehicleServicePros.com http://www.VehicleServicePros.com/21229347 http://www.VehicleServicePros.com
PTEN_0821

Table of Contents for the Digital Edition of PTEN_0821
