Fig. 3 Fig. 4 teeth-separated retracted view (Fig. 4)-a dentofacial analysis was performed that showed the patient's right cuspid display in repose at -2 mm. Th e patient had a high lip dynamic and an excessive display of teeth. Facial integration: An iTero scanner was used to scan patient's existing bite, and Exocad was used to design a Kois deprogrammer. I used a SprintRay Pro 55S printer with NightGuard Firm resin. Patient's models were also printed using SprintRay resin Dental Model Tan. Treatment planning Th e patient wore the deprogrammer for one week. Composite resin was placed in the interproximal areas of the deprogrammer and light cured in the patient's mouth for extra retention on the lingual (Fig. 5) A reproducible dot was confi rmed on the deprogrammer platform after one week of wear. An iTero scanner was used to scan the patient while using the deprogrammer to fi nd the centric relation bite. We had the patient bite on the deprogrammer and then scanned the patient's bite. Th e Kois Dento-Facial Analyzer system was used to mount the models on the articulator (Panadent). DECEMBER 2024 | 36 | DENTALTOWN.COMhttp://www.DENTALTOWN.COM