Henry Schein Brand Catalogue_EN - 119

ORTHODONTICS
®
Orthodontic Instruments
MAXIMA®
OPTICAL PLIERS
Round and concave beaks bend round or
rectangular wire with a firm grip that will
not score wire. Easily bends and forms all
types of wire up to .022 " x .025 "
(.53 mm x .64 mm).
(900-7622) ................................Ea.
MAXIMA®
ADAMS PLIERS
Tapered square beaks; .045 " (1.1 mm) at
tip and parallel at 1 mm opening, ideal
for placing all types of attachments or
bending wire up to .40 " (1.0 mm).
(900-7625) ................................Ea.
5 @ 251.19
258.99
MAXIMA®
DETAILING STEP PLIERS 1 mm
Double-sided offset beak permits bayonet
bends. Creates right-hand or left-hand
step-up or step-down at 1 mm increments.
(900-7629) ................................Ea.
5 @ 251.19
258.99
5 @ 251.19
258.99
MAXIMA®
ARCH BENDING PLIERS
MAXIMA®
Easily torque and bend wires without
nicking the archwire. .070 " (1.8 mm)
blade width. Wires up to .022 " x .025 "
(.53 mm x .64 mm)
(900-7623) ................................Ea.
LOOP TIE BACK PLIERS
5 @ 251.19
258.99
Four-step pliers automatically form loops
on wire up to .020 " (.51 mm) with one
motion. Closing loops are easily made to
desired height.
(900-7626) ................................Ea.
MAXIMA®
PLIERS
Forms double-back and triple-back bends
in .030 " (.76 mm) and .036 " (.91 mm) wire
for lingual sheaths.
(900-7630) ................................Ea.
5 @ 251.19
258.99
5 @ 251.19
258.99
LINGUAL ARCH FORMING
MAXIMA®
PLIERS
HOLLOW CHOP CONTOURING
Smooth working surfaces allow for
consistent forming and contouring
of arches up to .030 " (.76 mm).
(900-7624) ................................Ea. 258.99
MAXIMA®
NANCE LOOP FORMING PLIERS
Precision loop forming with four step tip
(3, 4, 5, and 6 mm). Excellent for wires up
to .022 " (.53 mm). Non-serrated tips and
beveled edges prevent wire scoring.
(900-7627) ................................Ea.
5 @ 251.19
258.99
MAXIMA®
STOP (V-BEND) PLIERS
Place an accurate 1 mm V-bend with one
simple squeeze to shorten archwire or
provide a positive stop. Wires up to
.022 " x .025 " (.53 mm x .64 mm).
(900-7631) ................................Ea.
5 @ 251.19
258.99
MAXIMA®
CROWN & BAND
MAXIMA®
ANGLED
CONTOURING PLIERS
Ideal for reshaping molar bands and
crowns.
(900-7633) ................................Ea.
5 @ 251.19
258.99
MAXIMA®
DETAILING STEP PLIERS ¾ mm
Double-sided offset beak permits bayonet
bends. Creates right-hand or left-hand stepup
or step-down at ¾ mm increments.
(900-7628) ................................Ea.
5 @ 251.19
258.99
Designed for placement and securing
of crimpable archwire hooks and power
hooks. Angled beak allows for precise
placement of hook on archwire.
(900-7632) ................................Ea.
5 @ 251.19
258.99
HOOK CRIMPING PLIERS,
MAXIMA®
DISTAL CINCH BACK PLIERS
The distal cinch back pliers handle the
difficult task of cinching the wire behind the
buccal tube with one squeeze after the wire is
ligated. They will not distort the archwire and
eliminate the need to anneal NiTi wire. They
also help eliminate emergency visits due to
wire slippage out of the buccal tubes.
(900-7634) ................................Ea.
5 @
258.99
251.19
MAXIMA®
TORQUING PLIERS SET w/KEY
Specifically designed to place torquing
bend into the small sections of archwires
(such as a bend for a single tooth) without
distorting adjacent sections of the
archwire. Two-piece set consists of one
torquing plier and corresponding key.
(900-7635) ................................Ea.
5 @
258.99
251.19
Call to Order: 1.800.668.5558 * Fax: 1.800.263.3962 * www.henryschein.ca
119
ORTHODONTICS
Henry Schein Brand Catalogue_EN

Table of Contents for the Digital Edition of Henry Schein Brand Catalogue_EN
