FRAME STRUCTURE 1-INCH STAINLESS FRAME Beam (In Feet) 7' 9' 10.5' 13.5' 1-frame 1.5 hrs. 1.5 hrs. 1.75 hrs. 2.5 hrs. 2-frame 2 hrs. 2.25 hrs. 2.5 hrs. 4 hrs. 3-frame 2.5 hrs. 2.75 hrs. 3 hrs. 5 hrs. 4-frame 3 hrs. 3.25 hrs. 3.5 hrs. 5 hrs. 5-frame 3.5 hrs. 3.75 hrs. 4 hrs. 6 hrs. OPTIONS Rigid supports (one pair) Through-bolt mounts » Bimini NOTE: These times include the design, bending, assembly and installation of the frame onto the boat. They do not include any of the options listed, nor do they include any actual fit of the top. 1 hr. 0.75 hr. Severe angle mounts 2 hrs. Dog-leg frame 0.5 hr. Split mount 0.75 hr. Grab rail 0.5 hr. *** SEE CONSIDERATIONS ON PAGE 20. ATTACHED BIMINI Beam (In Feet) 7' 9' 10.5' 13.5' 1-frame 4.5 hrs. 5 hrs. 5.5 hrs. 7 hrs. 2-frame 7 hrs. 7 hrs. 9.5 hrs. 12.5 hrs. 3-frame 8 hrs. 8 hrs. 10.5 hrs. 14 hrs. 4-frame 9 hrs. 9.5 hrs. 12 hrs. 16 hrs. Beam (In Feet) 7' 9' 10.5' 13.5' Attachment using Zipper and Keder 1 1.25 1.5 1.75 7' 9' 11' 13+ 1-frame 0.5 hr. 0.5 hr. 0.75 hr. 0.75 hr. 2-frame 1 hr. 1 hr. 1.25 hrs. 1.25 hrs. 3-frame 1.5 hrs. 1.5 hrs. 1.75 hrs. 1.75 hrs. OPTIONS Straps (one pair) For odd-shaped arch: 0.5 hr. Add 1.5 hrs. ZIPPER POCKETS Beam (In Feet) OPTIONS Zipper Walk-Through 2 hrs. Front Panel Clear Insert 3 hrs. Straps (one pair) 0.5 hr. *** SEE CONSIDERATIONS ON PAGE 20. NOTE: An attached bimini is any top supported by framework and attached to either the boat, a radar arch or another top at one end. A convertible top is any top supported by framework that attaches to a windshield on the front edge. Times and materials listed are for a base product with no zipper pockets, enclosure zippers, or any options. This does not include convertible tops. These times are for the canvas top only; they do not include manufacturing the frame or installing the frame on the boat. » Attached Bimini and Enclosure www.marinefabricatormag.com | 21 0121MF_19-31_TimeStand.indd 21 12/14/20 11:31 AMhttp://www.marinefabricatormag.com