Specialty Fabrics Review August 2020 - 41

---- Meeting the
demands of many
markets, including
military, safety,
industrial, commercial
and sports, high
performance webbing
applications include MIL-Spec, PIA-Spec,
binding tapes, parachute setups, harnesses,
packs, chin straps, climbing webs and seat
belts. Berry Amendment material is available,
including polyester webbing. The materials
maximize the end products' performance
characteristics and properties, including
durability, resistance to abrasion, chemicals,
heat and weather.

---- Lightweight and
cost effective, woven
composites are
produced using a
multidimensional
continuous weaving method that produces
textiles that can be fabricated into near netshape structures. These advanced weaving
capabilities offer new solutions that reduce
weight while eliminating many costly, timeconsuming and labor-intensive processes.
Applications include 3D woven joints, woven
thermal protection systems (TPS) and advanced
woven composite 3D structures.

www.ballyribbon.com

Covestro LLC
BOOTH 643

 INSQIN® raw
materials are
waterborne
polyurethanes
for use in
high-performing, sustainable textile coatings.
By replacing traditional solvents with water,
the polyurethane products enable safer and
more eco-friendly textile production without
sacrificing performance. Recommended for
automotive, apparel, footwear and upholstery.

DAP America Inc.

-----

 Featuring a
built-in motor with
DAC Flex control
including DELTA
Commander, the M-Type DELTA 867-190922-M
offers a programmable setting element and
approved sewing technology (XL hook/standard
thread trimmer). Includes programmable
electronic thread tension for reproducible
sewing results, programmable stitch length
adjustment by means of integrated step motor,
programmable sewing foot pressure and sewing
foot lifting height. Electronic needle positioning
by Jog-Dial. No compressed air required.
Machine settings and complex seam
programs can be stored.

-----

BOOTH 1683

 Developed for many
markets including
oil spill booms and
turbidity barriers, e2
Green Boom LLDPE is
an alternative to PVCcoated products for
times when weight is a
concern. This is achieved by the lower specific
gravity of LLDPE, which makes it about 30%
lighter than PVC while maintaining a similar
thickness. In many cases LLDPE can provide
enhanced chemical and hydrocarbon resistance.
The fabric remains flexible at low temperatures
and is available in widths up to 120 inches
and from 20 to 120 mils thick. Available
encapsulated or non-encapsulated.

www.dapamerica.com

Docril Fabrics LLC/CITEL
BOOTH 956

 For solar
protection, Docril
is for awnings,
sunshades and
umbrellas. Manufactured with solution-dyed
acrylic fiber, the fabric is less vulnerable to
UV radiation and colors are guaranteed.
The full-bodied fabric is not too heavy to
hinder proper fit or functioning.

----Docril N is 100 percent solution-dyed acrylic
fabric for nautical equipment. Waterproof, UV
protective with mold prevention treatment, the
fabric endures wet climates, splashes and heavy
rainfalls. Special anti-putridity finish prevents
growth of microorganisms.

www.docrilfabrics.com

E2 - E Squared Technical Textiles
BOOTH 1733

www.covestro.com

 Offering exceptional tear values, e2 Air
Tite coated fabric is more resistant to onsite
damage during installation while meeting the
strength requirements of both type I and type II
standards. The fabric offers a high-performance
product for air-supported domes, frame
buildings, tension structures and tents.

 For dock seals and high abrasion
resistance applications, e2/ EPT XtrmPly
H.A.R. (High Abrasion Resistance) 40-ounce
TPU (Thermoplastic Polyurethane) coated
fabric offers improved abrasion and puncture
resistance over standard PVC dock seal
products, which result in improved longevity.
Made in the USA, the fabric has been tested and
certified to 40,000+ abrasion cycles-up to 10
times the abrasion resistance of the competitive
40-ounce PVC coated fabrics tested. Cold
temperature performance -60 degrees F.

---- E2 Flexible PVC
Films are thin-gauge
films-they can be
manufactured in
thicknesses as low
as 1.8 mil., which
reduces weight
and the amount of raw materials required in
various products. Made in the USA, the films
are custom engineered and are offered in
custom colors (including high-visibility options),
various embossings and reasonable lead times.
Recommended for industrial applications
including laminating films, tapes, bladders/
liners and binding.

www.e2techtextiles.com

www.SpecialtyFabricsReview.com 41

0820RV_p39-48_ProPre.indd 41

7/21/20 4:48 PM
http://www.dapamerica.com http://www.ballyribbon.com http://www.docrilfabrics.com http://www.covestro.com http://www.e2techtextiles.com http://www.SpecialtyFabricsReview.com
Specialty Fabrics Review August 2020

Table of Contents for the Digital Edition of Specialty Fabrics Review August 2020
