SPLICING WIRE MESH TRAY CABLOBEND FLEX WIRE MESH TRAY * Optimal flex wires. The optimized balance of strength and speed for the quickest up-and-down bends in the industry * Wide range of adjustability. Vertical and horizontal angle adjustability to 90° to fit any configuration * Safer installation. No need for cutting tools and less time on elevated areas for installation * Load capacity. Same as field cut and formed bends * Variety of widths and combinations. Heights of 2 " , 4 " or 6 " combined with widths from 6 " to 24 " to create the vertical bends, vertical elevation changes, horizontal offset changes and horizontal bends that you need * Included clips to make sections rigid. Create rigid sections if needed or leave flexible sections for bends and drops APPLICATIONS * Fully assembled and ready-to-use. Increases efficiency in the field * UL Classified. Meets UL classification. Cablobend black painted tray provides a UL rated bonding location on both ends of every bend assembly BENDLOCK lock segments together for rigidity where needed DEPTH IN CABLOBEND 54/150 CABLOBEND 54/200 CABLOBEND 54/300 CABLOBEND 54/450 CABLOBEND 54/600 CABLOBEND 105/150 CABLOBEND 105/200 CABLOBEND 105/300 CABLOBEND 105/450 CABLOBEND 105/600 CABLOBEND 150/150 CABLOBEND 150/200 CABLOBEND 150/300 CABLOBEND 150/450 CABLOBEND 150/600 2.0 2.0 2.0 2.0 2.0 4.0 4.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 MM 54 54 54 54 54 105 105 105 105 105 150 150 150 150 150 IN 6.0 8.0 12 18 24 6.0 8.0 12 18 24 6.0 8.0 12 18 24 WIDTH MM FINISH / AVAILABILITY EZ BL 150 SM 200 SM 300 SM 450 SM 600 SM 150 SM 200 SM 300 SM CABLOBEND 54/150EZ 450 SM 600 SM 150 SM 200 SM 300 SM 450 SM 600 SM Each Cablobend Kit comes with Bendlock Kit (15) for securing individual segments not being modified to increase rigidity of the final fitting. S - NORMALLY STOCKED M - MADE TO ORDER ORDER EXAMPLE A.17 WWW.LEGRAND.US/CABLOFILhttp://WWW.LEGRAND.US/CABLOFIL