PW LADDER TRAY BLIND END PLATE /8 " dia. connector fasteners. MT G* Seals off the open end of a cable tray. Attaches to the tray using standard 3 PRODUCT NUMBER 0402 Height/Material FASTENER OPTIONS GE S6 CATALOG NUMBERING EXAMPLE: Width Fasteners 4T - 0402 - 12 - GE CABLE DROPOUT MT G* Provides a smooth, rounded surface for cables dropping out of the bottom of the cable tray. PRODUCT NUMBER 0253 0254 FASTENER OPTIONS CATALOG NUMBERING EXAMPLE: Material -Flange Width Fasteners MI-0253-06 -S6 TRAY WIDTH (NOMINAL) 6 DROPOUT WIDTH (FLG IN) 21 DROPOUT WIDTH (FLG OUT) 51 9 /4 /4 51 81 /4 /4 113 12 18 24 30 36 141 173 /4 /4 /4 /4 201 233 /4 /4 261 293 /4 /4 321 353 R 3/4 5 ZN S6 81 /4 /4 IN WALL PENETRATION SLEEVE MG T Provides a rigid support for cable tray at wall penetrations. Overall length of the sleeve is 20 " . Will fit walls up to 8 " thick. Bonding jumpers are not required for use with wall sleeves. Two pairs of splice plates and fasteners are included for tray attachment. SERIES1 (S1) SERIES2 (S2) PRODUCT NUMBER 0424 FASTENER OPTIONS GE S6 CATALOG NUMBERING EXAMPLE: Connector System No Width Fasteners 4T2 - 0424 -12- S6 PRODUCT NUMBER 0434 FASTENER OPTIONS GE S6 CATALOG NUMBERING EXAMPLE: Connector System No Width Fasteners 4G2 - 0434 -06- GE OUTDOOR CONVERSION KIT FOR WALL PENETRATION GT Makes ladder tray wall penetrations weather resistant to minimize water intrusions. Removable cover/shield fastens to tray and wall penetration sleeve for weather protection. SERIES1 (S1) SERIES2 (S2) * Fits Standard Hot-Dip Galvanized or Stainless " 0424 " or " 0440 " wall penetrations (see page B.62, B.68.) * Sized to fit flange-in or flange-out trays The wall penetration sleeve and outdoor conversion kit are designed to fit Series 1 and 2 systems. When ordering, however, they should be specified as Series 2. B.62 G* = optional WWW.LEGRAND.US/CABLOFIL METALLIC ACCESSORIEShttp://WWW.LEGRAND.US/CABLOFIL