PW LADDER TRAY HOLD DOWN/EXPANSION CLAMP AZ T Works as an expansion guide and flips over for use as a hold down clamp for use with all ladder trays. Sold in packs of 10. PRODUCT NUMBER 1893-01* 1893-02 1893-03† Material FASTENER OPTIONS ZN S6 NONE ZN S6 CATALOG NUMBERING EXAMPLE: Fasteners A - 1893-03 -ZN A - 1893-02 * Includes 3/8 flanged nut. † Includes 3/8 spring nut. " x 1½ " hex bolt, 3/8 " " x 1½ " hex bolt, 3/8 " Z-HOLD DOWN MT G* Wraps around the tray side rail for use with all solid bottom trays. Can also be used with any flange-in tray system. Sold individually. PRODUCT NUMBER 1866-01* 1866-02 1866-03† Accessory System No. FASTENER OPTIONS ZN S6 NONE ZN S6 CATALOG NUMBERING EXAMPLE: Fasteners 4M - 1866-01 -ZN * Includes ¼ " x ¾ " carriage bolt, ¼ " flanged nut. † Includes ¼ " x 1½ " screw, ¼ " spring nut. HEAVY-DUTY HOLD DOWN BRACKETS Designed for use with all trays. 3/8 /2 AG T " diameter hardware for tray attachment only is included. Holes for structure attachment are sized for 1 bracket is ideal for vertical tray support. Sold in pairs. SINGLE - A833 DOUBLE - A845 " diameter fasteners. Double PRODUCT NUMBER A833 A845 Material FASTENER OPTIONS GE S6 GE S6 CATALOG NUMBERING EXAMPLE: Fasteners T - A845 -S6 WIDTHS (W) INCHES 6 9 12 18 24 30 36 RAIL HEIGHTS (H) INCHES 45 67 For detailed material and finish descriptions, see page B.6. SPLICES Match above to determine the connectors you need. SERIES1 (S1) Fitting side rails have 2 " tangents (flat portion beyond curvature) at the end of each fitting, to accommodate splice plates with four holes. SERIES2 (S2) Fitting side rails have 5 " tangents at the end of each fitting, to accommodate splice plates with eight holes. B.63 WWW.LEGRAND.US/CABLOFIL METALLIC ACCESSORIEShttp://WWW.LEGRAND.US/CABLOFIL