V-TROUGH INSTALLATIONS TROUGH TRAY CUTTING STRAIGHT SECTIONS Trough tray can be cut to length with a reciprocating saw fitted with a fine metal cutting blade. Mark three sides of the tray using a square and make allowances to keep mounting hole slots in position for splicing to other straight sections or fittings. Use a flat file to remove all rough edges. Cover sections can be modified in the same way. CUTTING STRAIGHT SECTIONS FOR ELEVATION CHANGES Cut only the sides of the tray for changes in cable pathway elevations. Make a 90 degree cut in both sides of the tray for a downward bend. For an upward bend, make a double cut to form a notch. The notch should be sized to fit the tray angle needed. Then, using a straight edge, form the tray to the proper angles. C.25 WWW.LEGRAND.US/CABLOFIL INSTALLATION GUIDELINEShttp://WWW.LEGRAND.US/CABLOFIL