WIRE & CABLE HANGERS OVAL SLEEVES URCR ™ UNIVERSAL RESTRAINT CLIP RETROFIT The URCR™ is slotted to permit a hex nut on an existing component to be loosened before positioning the URCR™ and then re-tightening the nut. UL listed and will comply with Local, National and International Building Codes. URCR Oval sleeve fittings come in four sizes to secure Sizes 12 GOLD,18 ORANGE, 36 GREEN & 48 BLACK Seismic Wire Rope/Cable™ connections with the proper swaging tools shown below. COMPLETE CATALOG NO. PW-12-SLV PW-18-SLV PW-36-SLV CABLE SIZE BAG QTY. DESCRIPTION 12 100 (1) BAG OF 100 #12 OVAL SLEEVES P088151 18 100 (1) BAG OF 100 #18 OVAL SLEEVES P088179 36 100 (1) BAG OF 100 #36 OVAL SLEEVES P088204 COMPLETE CATALOG NO. PW-URCR-1/4P PW-URCR-3/8P PW-URCR-1/2P PW-URCR-5/8P CABLE SIZE ALL ALL ALL HOLE DIA. " 1/4 3/8 " ALL ½ " 5/8 " URCR FOR 1 URCR FOR 3 DESCRIPTION /4 /8 " HANGERS " HANGERS URCR FOR ½ " HANGERS URCR FOR 5 /8 " HANGERS P602182 P602184 P602181 P602185 NO PRY CLIP ASSEMBLY TOOLS These concrete structure attachment fittings direct the applied tension load on post-installed concrete anchors to the axis of the anchor and at the surface of the concrete, thereby neutralizing the prying effect on the anchors and making the brace assemblies stronger. COMPLETE CATALOG NO. PW-12-SBHS PW-1-SBHS DESCRIPTION (1) HAND SWAGER FOR CRIMPING OVAL SLEEVES P645164 (1) LARGE SWAGER FOR CRIMPING OVAL SLEEVES P644628 The hand swager is capable of swaging all three sizes of oval sleeves for the braces in this manual. These tools are factory calibrated and are furnished with gages and instructions to insure the proper swaging of oval sleeves. The hand swager is 26 " long and weighs 6.5 lbs. COMPLETE CATALOG NO. CABLE SIZE PW-NPC-3/8P ALL HOLE DIA. " 3/8 PW-NPC-1/2P ALL ½ " PW-NPC-5/8P ALL 5/8 PW-NPC-3/4P ALL ¾ " " PW-C7 PW-C9 NPC FOR 3 DESCRIPTION /8 /8 " HANGERS NPC FOR ½ " HANGERS NPC FOR 5 NPC FOR ¾ " HANGERS " HANGERS P604300 P604705 P643101 P630517 (1) FELCO CABLE CUTTER FOR #12 AND #18 CABLES P088205 (1) FELCO CABLE CUTTER FOR #12 , #18 AND #36 CABLES P088206 PW-12-SBHS PW-1-SBHS PW-C7 PW-C9 The Felco type C-7 and type C-9 Precision Cable Cutters are ideal for cutting and trimming excess cable. The C-7 cutter is 8 inches long, weighs 10 ounces and is used to cut size 12 and 18 cables with one hand. The type C-9 cutter is a two-handed tool that cuts all three cable sizes with ease. D.35 WWW.LEGRAND.US/CABLOFIL SEISMIC BRACINGhttp://WWW.LEGRAND.US/CABLOFIL