WIRE MESH TRAY BDO BASIC DROP OUT - BOTTOM MOUNT * Protects cables when exiting and entering tray. * Snap-in mounting tabs eliminate the need for attachment hardware and speeds install time. * BDO: Width 7.8 " /200mm * 4 " width capacity allows small cable bundles through the mesh. * Full 90-degree drop eliminates pressure points on cables as the 2 " radius reduces cable stress. * Extended side wings on each side offer extra wider cable support area outside the tray. * Tie-down slots are available to assist and secure the cables as they exit the dropout. * Compatible with all Cablofil® Wire Mesh trays. WEIGHT LBS BDO 0.1 KG 0.06 PG S FINISH / AVAILABILITY 316L S ORDER EXAMPLE BL S BDOPG S - NORMALLY STOCKED M - MADE TO ORDER SDO STANDARD DROP OUT - SIDE MOUNT INSTALLATION VIDEO * Simply rotate SDO between top two wires to install, no Hardware required * Protects cables when exiting and entering tray. Slotted design allows for cable tie or velcro tiewrap cable attachment. * 7 " radius bend eases strain on cables. * Kit contains two EZ BN 1/4 and two CE 25 with one SDO. * Available in 150 (6 " ) and 300 (12 " ) widths that when used in combination provide options for 6 " , 12 " , 18 " , and 24 " . * 90-degree drop eliminates pressure points while the 3 " radius reduces stress on the cables. * Compatible with all Cablofil® the side wires * No tray cutting required. LENGTH IN SDO150 SDO300 6 12 MM 150 300 LBS 0.4 0.9 WEIGHT KG 0.2 0.4 FINISH / AVAILABILITY PG S S BL S S ORDER EXAMPLE SDO150PG SDO300PG S - NORMALLY STOCKED M - MADE TO ORDER SDO may also be used as a bottom mount dropout; hardware (included) required for this installation A.41 WWW.LEGRAND.US/CABLOFIL EZ BN 1/4 CE 25 x2 x2 Wire Mesh trays by locking on * Tie-down slots included to secure the cables as they exit the drop out. DROP OUTShttp://WWW.LEGRAND.US/CABLOFIL