WIRE MESH TRAY PROPER USE OF FAS TABS - WIRE MESH TRAY FAS tabs speed up installation times and because no additional attachment hardware is required, they also reduce costs. Follow these steps for proper installation: 1 2 3 Insert tray into slots Slide tray under tabs 1 2 From the underside, depress several tabs using a screwdriver or pliers to secure tray 3 Attach mount to wall Slide tray under tabs HOW TO USE - FS41 1 2 3 Depress all tabs using a screwdriver or pliers to secure tray Hook one side of the FS41 into channel support. Depress FS41 and hook other side into channel support. 1 PROPER GROUNDING FOR PAINTED TRAY - SWK 2 Add an additional FS41 on the opposite side of the channel support for secure installation. 3 Remove outer mask of copper strip (painted over) exposing the copper strip at each end of the tray. Position tray so that the exposed copper strips are aligned and use SWKs to join tray sections. Add another SWK to the bottom section over the copper strips for proper grounding. A.63 WWW.LEGRAND.US/CABLOFIL INSTALLATIONShttp://WWW.LEGRAND.US/CABLOFIL