WIRE MESH TRAY CABLOBEND Making a Horizontal 90 Bend: 1. Evaluate the below diagram and chart to determine which provides the best fit 2. Modify the Cablobend by bending individual sections for best fit 3. Lock in unbent sections with bend clips to improve fitting rigidity 4. Splice Cablobend to adjacent tray straight sections with UL listed SWKs HORIZONTAL BEND 90 DEGREE (TIGHT AS POSSIBLE) Tray Width No. of Sections ≈ Radius (I) 6 " 8 " Y Width Dependent R X 12 " 18 " 24 " 4 4 5 6 8 6 " 7 " 11 " 13 " 20 " Larger radius and smaller siderail tray gaps can easily be developed using more bend segments than shown above. ≈ Radius (O) 12 " 15 " 23 " 31 " 44 " INSTALLATION VIDEO Angle 90° 90° 90° 90° 90° CF54/150 CF54/300 CF54/600 With Cablobend, you have the freedom to flexibly create the bends and drops that you need. No more cutting to make most bends. Bends Drops Offsets A.72 WWW.LEGRAND.US/CABLOFIL Elevation Changes INSTALLATIONShttp://WWW.LEGRAND.US/CABLOFIL