PW LADDER TRAY SPECIFYING YOUR ORDER Aluminum Tray The numbering system for Itray Aluminum 4 " to 7 " tray is new and easier to use. Please review these examples before specifying your order. BOTTOM TYPE VENTED ITRAY STRAIGHT SECTION CATALOG NUMBERING EXAMPLE: 09-4 A 12 B - S 144-06 06 - 6 " Rung Spacing 09 - 9 " Rung Spacing 12 - 12 " Rung Spacing VC - Vented Corrugated NON-VENTED SC - Solid Corrugated SB - Solid Bottom RAIL HEIGHT 4 - 4 " 5 - 5 " 6 - 6 " 7 - 7 " NEMA CLASS MATERIAL A Overall rail height is clearly marked with 4 " to 7 " heights available. The tray material is listed as well. Currently Itray will only be offered in Aluminum. Stronger I-beam construction means no series choice is needed. BOTTOM TYPE VENTED LD - Ladder Rung VC - Vented Corrugated NON-VENTED SC - Solid Corrugated SB - Solid Bottom LENGTH S120 - 120 " S144 - 144 " S240 - 240 " S288 - 280 " WIDTH 06 - 6 " 09 - 9 " 12 - 12 " 18 - 18 " 24 - 24 " 30 - 30 " 36 - 36 " The tray system number is the same as the NEMA Class - no cross-reference needed. ITRAY FITTING CATALOG NUMBERING EXAMPLE: L D -4 A -90 H B 12-06 RAIL HEIGHT 4 - 4 " 5 - 5 " 6 - 6 " 7 - 7 " Look for the Itray Compatible designation throughout the Ladder, Trough and Solid Bottom section of this catalog for products that also fit Itray specifications. STRAIGHT SECTION CATALOG NUMBER 09-1 F 54-0020-12 BOTTOM TYPE VENTED 06 - 6 " Rung Spacing 09 - 9 " Rung Spacing* 12 - 12 " Rung Spacing VC† SC† SF† TRAY SYSTEM NUMBER - Vented Corrugated NON-VENTED - Solid Corrugated - Solid Flat Bottom * Standard rung spacing † Not available for flange out tray This identifies the specific tray design and is used as a catalog number prefix for straight sections. LENGTH 0010 - 10'-0 " 0012* - 12'-0 " 0020† - 20'-0 " 0024 - 24'-0 " * Standard for SERIES1 (S1) † Standard for SERIES2 (S2) WIDTH 06 - 6 " 09 - 9 " 12 - 12 " 18 - 18 " 24 - 24 " 30 - 30 " 36 - 36 " SIDE RAIL HEIGHT 4 - 4 " 5 - 5 " 6 - 6 " 7 - 7 " FITTING MATERIAL A DESCRIPTION 90º Horizontal Elbow RADIUS 12 - 12 " 24 - 24 " 36 - 36 " WIDTH 06 - 6 " 09 - 9 " 12 - 12 " 18 - 18 " 24 - 24 " 30 - 30 " 36 - 36 " No complicated Fitting System Number or Product Number. The Fitting Description is now an abbreviated form of the product name. The numbering system for all other tray lines has not changed. FITTING CATALOG NUMBER Use 4-digit Fitting System No. FITTING BOTTOM TYPE SYSTEM NO. PRODUCT NO. WIDTH L D- 6G2O -9012-24 FITTING SERIES MATERIAL G L T 1 - SERIES1 (S1) 2 - SERIES2 (S2) FLANGE DIRECTION I - Flange In O - Flange Out Radius measurement is now clearly shown. B.13 WWW.LEGRAND.US/CABLOFIL INTRODUCTIONhttp://WWW.LEGRAND.US/CABLOFIL