PW LADDER TRAY OHCB OVERHEAD CLAMP KIT Z * Designed for trapeze hanging of Itray without drilling. * Mounting kits available for 3/8 " and 1/2 " threaded rod * Kit includes: eight SFHN (nuts with washers), two top brackets, two bottom brackets. Threaded rod sold separately. * Load rated at 1220 lbs/pair * Can be used on fittings or straight sections of PW Itray PRODUCT CODE OHCB38KIT OHCB12KIT HOLE SIZE WIDTH .375 .5 1.5 1.5 LENGTH (TOP) 3.6 3.6 LENGTH (BOTTOM) 3 3 FASTENERS ZN S6 OCK OUTDOOR CONVERSION KIT A Makes ladder tray wall penetrations weather resistant to minimize water intrusions. Removable cover/shield fastens to tray and wall penetration sleeve for the utmost in weather protection. PRODUCT CODE OCK FASTENER OPTIONS GE S6 CATALOG NUMBERING EXAMPLE: H / Material 4A - OCK -06- S 6 * Wall Penetration Sleeve (WPS or FWPS) not included in kit, must be ordered separately Hilti Fire Blocks Penetration Sleeve Cables W Fasteners FWPS FIRE WALL PENETRATION SLEEVE Fixed collar is welded to sleeve PRODUCT CODE FWPS H / Material 20 " Loose collar slides over sleeve after it is placed in the wall M G FASTENER OPTIONS Cable trays are attached to both ends of the sleeve using standard splice plate connectors GE S6 CATALOG NUMBERING EXAMPLE: W*+6 " * Steel only; aluminum not available as it does not meet fire rating requirements 4G - FWPS -06- S 6 H*+6 " W*=Nominal Tray Width H*=Tray Side Rail Height * See pgs. B.68-69 for more information SIDE VIEW Wall Assembly (Gypsum Wall Shown) 20 " AdjustableCollar Cables Loose collar slides over sleeve after it is placed in the wall Hilti Fire Blocks W Fasteners 7/16 " diameter holes for 3/8 " hardware (not included) Fixed Collar Floor Assembly WPS WALL PENETRATION SLEEVE Fixed collar is welded to sleeve M G Adjustable Collar 20 " Fixed Collar Loose collar slides over sleeve after it is placed in the wall Fixed collar is welded to sleeve Provides a rigid support for cable tray at wall penetrations. Overall length of the sleeve is 20 " . Will fit walls up to 8 " thick. Bonding jumpers are not required for use with wall sleeves. Two pairs of splice plates and fasteners are included for tray attachment. Cable trays are attached to both ends of the sleeve using standard splice plate connectors W*+6 " 7/16 " diameter holes for 3/8 " hardware (not included) H*+6 " PRODUCT CODE WPS Wall Assembly (Gypsum Wall Shown) AdjustableCollar Hilti Fire Blocks Penetration Sleeve Cables Hilti Fire Blocks Fixed Collar Wall Anchors (Not Included) Adjustable Collar Cables Masonry Anchors (Not Included) Penetration Sleeve Floor Assembly H / Material Cables W*=Nominal Tray Width H*=Tray Side Rail Height FASTENER OPTIONS GE S6 CATALOG NUMBERING EXAMPLE: W Fasteners Hilti Fire Blocks 4M - WPS -06- S 6 Fixed Collar Wall Anchors (Not Included) Cable trays are attached to both ends of the sleeve using standard splice plate connectors END VIEW W*+6 " 7/16 " diameter holes for 3/8 " hardware (not included) H*+6 " Masonry Anchors (Not Included) Penetration Sleeve Each cable tray firestop sleeve includes: * One penetration sleeve with flanges * Fire Blocks * One Firestop Putty Stick / Sealant * Hardware for cable tray connection to the wall sleeve W*=Nominal Tray Width H*=Tray Side Rail Height Hilti Fire Blocks Wall Assembly (Gypsum Wall Shown) AdjustableCollar Penetration Sleeve UL classified for use with: 2-hr concrete or block walls 2-hr concrete floors 1-hr gypsum walls 2-hr gypsum walls Cables Fixed Collar Floor Assembly B.31 Adjustable Collar Fixed Collar For detailed material and finish descriptions, see page B.6. Wall Anchors (Not Included) Masonry Anchors (Not Included) WWW.LEGRAND.US/CABLOFIL Penetration Sleeve ITRAY - ACCESSORIEShttp://WWW.LEGRAND.US/CABLOFIL