PW LADDER TRAY VENTED CORRUGATED SOLID CORRUGATED 6 8 10 12 SUPPORT SPAN (FT.) 14 16 439 0.31 250 0.55 160 0.86 111 1.24 439 0.20 338 0.51 216 0.79 150 1.14 110 1.55 18 SAFE LOAD DATA (LBS./FT.) / DEFLECTION (IN.) / SAFETY FACTOR 1.5 84 2.02 439 0.16 439 0.50 312 0.88 217 1.26 159 1.72 122 2.25 400 0.21 225 0.38 144 0.59 100 0.85 439 0.11 439 0.37 304 0.62 211 0.90 155 1.22 119 1.59 67 96 94 2.56 2.84 2.02 54 78 76 84 3.16 3.51 2.49 420 0.13 236 0.22 151 0.35 105 0.50 439 0.08 439 0.25 336 0.47 233 0.68 171 0.92 131 1.20 104 1.52 439 0.20 439 0.50 319 0.75 235 1.02 180 1.34 142 1.69 115 2.09 1.88 400 0.10 225 0.18 144 0.28 100 0.40 439 0.07 439 0.22 300 0.38 208 0.54 153 0.73 117 0.96 93 1.22 75 1.50 439 0.17 439 0.42 319 0.63 235 0.86 180 1.12 142 1.42 115 1.75 44 63 61 68 93 61 93 3.74 4.18 2.92 2.24 2.48 1.79 2.11 34 52 50 53 73 50 76 4.07 4.87 3.38 2.47 2.75 2.08 2.52 20 22 24 Legrand trays marked with CSA load class have been tested (loading, finish and electrical) by UL to CSA standard 126 22.2 . All Legrand steel cable trays are Classified by UL as equipment grounding conductors per NEC 392.60. (UL File No. E60796) BOTTOM TYPE STEEL STRAIGHT SECTION CATALOG NUMBERING EXAMPLE: SYSTEM NO. VENTED 06 - 6 " Rung Spacing 09 - 9 " Rung Spacing* 12 - 12 " Rung Spacing VC† SC† - Vented Corrugated NON-VENTED - Solid Corrugated * Standard rung spacing † Not available for flange out tray TRAY SYSTEM NUMBER This identifies the specific tray design and is used as a product number prefix for straight sections. LENGTH 0010 - 10'-0 " 0012* - 12'-0 " 0020† WIDTH - 20'-0 " 0024 - 24'-0 " * Standard for SERIES1 (S1) † Standard for SERIES2 (S2) 06 - 6 " 09 - 9 " 12 - 12 " 18 - 18 " 24 - 24 " 30 - 30 " 36 - 36 " B.37 For detailed material and finish descriptions, see page B.6. WWW.LEGRAND.US/CABLOFIL 09- A 457-0012-36 PRODUCT NO. METALLIC STRAIGHT SECTIONS - STEELhttp://WWW.LEGRAND.US/CABLOFIL