PW LADDER TRAY TRAY COVERS In most cases covers are not required. Covers are recommended the first six feet of a cable tray system extending vertically from a floor penetration. Installing covers on outdoor cable tray systems is not a common practice. If deemed neccessary, Cablofil recommends louvered covers to reduce the affect of wind lift on the system. SOLID COVERS FLANGE IN [-] FLAT, FLANGED M G L T PEAKED 15˚, FLANGED LOUVERED COVERS M G L T FLAT, FLANGED M G L T 2000 1000 3000 3005 13/4 " FLANGE OUT ]-[ SOLID, FLAT - FLANGED PRODUCT NUMBER 2066 1066 3036 3029 SOLID, PEAKED 15˚ - FLANGED PRODUCT NUMBER 2140 1140 3128 3017 2114 1114 3131 3040 LOUVERED, FLAT - FLANGED PRODUCT NUMBER 2007 1007 3070 3076 2104 1104 3003 3113 Flange is 3/8 " wide. WIDTHS (W) INCHES 6 9 12 18 24 30 36 RAIL HEIGHTS (H) INCHES 4 5 6 7 15˚ is standard angle for peaked covers. Flange is 3/8 " wide. Peaked vertical elbow fitting covers are not available. Flange is 3/8 " wide. COVER CATALOG NUMBERING EXAMPLE: COVER SIDE RAIL HEIGHT* 40 - 4 " 50 - 5 " 60 - 6 " 70 - 7 " SYSTEM NO. LENGTH OR FITTING PRODUCT NO. 60-2000-0012-36-05 LENGTH * Side rail height necessary for outside vertical fitting covers. ** HDGAF steel covers available in maximum 6' lengths B.50 WWW.LEGRAND.US/CABLOFIL 0006** - 6' 0010 - 10' 0012 - 12' or 9224 FITTING PRODUCT NO. Cover Thickness: G 18 Ga. WIDTH FITTING TANGENT 02 - SERIES1 (S1) (2 " Tangents ) 05 - SERIES2 (S2) (5 " Tangents ) M L T 20 Ga. METALLIC COVERShttp://WWW.LEGRAND.US/CABLOFIL