PW LADDER TRAY COVER CONNECTOR CLIPS T For use with indoor, horizontal covers. Flange-in clip requires tray with 1 " side rail flanges. Flange-out clip works with any side rail flange width. Sold individually. H-Binder Strip FLANGE-IN CLIP Abutting Covers Abutting Covers DESCRIPTION DESCRIPTION FLANGE-IN FLANGE-OUT PRODUCT NUMBER 1410 S6 1853* † CATALOG NUMBERING EXAMPLE (EA.): Material T - 1410 -S6 Fasteners FASTENER INCLUDED *1853 is FLAT JOINT STRIP PEAKED JOINT STRIP PRODUCT NUMBER 0925 0926 CATALOG NUMBERING EXAMPLE (EA.): Connector System No.† A2O - 0925 -06 AI and A2O are the only two options AI is Width FLANGE-OUT CLIP H-Binder Strip H-BINDER COVER JOINT STRIP Closes gaps at cover joints. Notched for the tray side rail. No fasteners required. A RAISED COVER CLAMP M T G* For use with all covers, indoors and outdoors. Covers are attached to uprightmounted " C " channel on the top of the cable tray. Install 36 " -48 " on center. Flat or Peaked Cover with Flanges Gap RAISED COVER CONNECTOR A M T Raised cover connectors allow for ventilation of ladder tray installations while protecting cables from possible falling objects. Raised cover connectors allow a gap of 1 " , 2 " , 3 " or 4 " . APPLICATION GAP DIMENSION (IN.) 1 2 3 4 Fitting System No. PRODUCT NUMBER 1441 1442 1443 1444 CATALOG NUMBERING EXAMPLE: Width Fasteners 6T2O - 1441 - 06 - S 6 FASTENER OPTIONS PRODUCT NUMBER 1432 ZN S6 FASTENER INCLUDED S6 CATALOG NUMBERING EXAMPLE (EA.): Material M - 1432 -S6 Fasteners B.52 RAIL HEIGHTS (H) INCHES 4 5 6 7 WWW.LEGRAND.US/CABLOFIL METALLIC COVER ACCESSORIEShttp://WWW.LEGRAND.US/CABLOFIL